Dayco Serpentine Belt P/N:6050565
Dayco 5040343 serpentine belt for the 1995-2004 Toyota Tacoma 4-cylinder 2.4L, 2.7L or V6 3.4L and other vehicles turns the engine's accessories from a single loop. Depending on the application, those accessories include the alternator, power steering pump, A/C compressor and water pump.
A worn belt can show cracks across the ribs, fraying, a glazed surface or a squeal at start-up. Before you replace the belt, rule out a weak tensioner, a worn idler pulley or a seized accessory, since a belt can squeal or wear early when a pulley or accessory is the real problem. Each engine takes a single belt.
The 1995-2004 Toyota Tacoma 4-cylinder 2.4L, 2.7L or V6 3.4L, the 1994-1997 Toyota Corolla 4-cylinder 1.6L or 1.8L and the 1996-2002 Toyota 4Runner are covered by this belt, along with many other vehicles. Cars outside those three are listed by year, model and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 25-040343
4K343 · 4PK870 · K040343 · 4040342 · PK040343 · 343K4 · 342K4
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the Toyota Corolla serpentine belt for a 1994-1997 Corolla 4-cylinder 1.6L or 1.8L?
Yes. Dayco 5040343 fits the 1994-1997 Toyota Corolla with the 4-cylinder 1.6L or 1.8L engine, with one belt per engine.
Is Dayco 5040343 a Toyota Tacoma serpentine belt replacement for the 1995-2004 Toyota Tacoma 4-cylinder 2.4L, 2.7L or V6 3.4L?
Yes. Dayco 5040343 fits the 1995-2004 Toyota Tacoma with the 4-cylinder 2.4L, 2.7L or V6 3.4L engine, with one belt per engine.
Is this Dayco drive belt made of EPDM?
Yes. This serpentine belt is EPDM with aramid reinforcement, and it has a straight rib profile with a K-section cross section and deep ribs.
What does a worn serpentine belt look like?
Cracks across the ribs, fraying or a glazed surface can mean the belt is worn, and a squeal at start-up can go with it. Inspect it by eye with the engine off and cool.
What temperature range and standards does Dayco 5040343 cover?
Dayco 5040343 operates from -45 F to 212 F (-42.7 C to 100 C) and is built to SAE J1459 and SAE J2432.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.