Dayco Serpentine Belt P/N:5100688
Dayco 5040430 serpentine belt for the 2022-2025 Ram 1500 V6 3.6L and other vehicles drives the engine's belt-driven accessories from the crankshaft. This Dayco serpentine belt runs over the power steering, air conditioning, water pump, idler and tensioner pulleys named in its listing.
A squeal or chirp when the engine starts, accessories that seem to drag, or cracks across the ribs can mean the belt is worn. A weak tensioner, a worn pulley or fluid on the ribs can make the same noise, so look those over with the engine off and cool before you replace the belt.
It is listed for a wide range of makes and models, led by the 2022-2025 Ram 1500 V6 3.6L, the 2017-2023 Porsche Panamera V8 4.0L and the 2020-2026 Audi RS Q8. The 2022-2025 Ram 1500 V6 3.6L takes one belt. If your car is not named here, look it up by year, make and model in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 146-041090 · 146-041100 · 25-040430 · 25-040430HD · 25-71092
4K430 · K040430HD · 4K0430 · 4PK1090 · 4PK1092 · 4PK1095 · 4PK1100 · K040430 · 4040430 · PK040430 · 430K4 · 40430
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Dayco 5040430 the right Ram 1500 serpentine belt for 2022-2025 models with the V6 3.6L?
Yes, Dayco 5040430 is listed for the 2022-2025 Ram 1500 V6 3.6L; look up any other vehicle by year, make and model in the "Vehicles it fits" section.
Is this Dayco drive belt made of EPDM?
Yes. The belt is EPDM with aramid reinforcement, and it has a straight rib profile with a K-section cross section.
What temperature range does the Dayco 5040430 belt handle?
Dayco 5040430 operates from -45 F (-42.7 C) up to 212 F (100 C). It is built to SAE J1459 and SAE J2432.
What wear should I look for on this EPDM serpentine belt?
With the engine off and cool, look for fraying, missing ribs or a shiny, glazed surface on the rib side. A shop can test belt tension and pulley alignment.
Does Dayco 5040430 cross-reference to 4PK1090?
Yes. 4PK1090 is on the interchange list for Dayco 5040430, along with 4PK1092, 4PK1095 and 4PK1100.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.