Dayco Serpentine Belt P/N:5060685

Be the first to review this product

$40.99

MPN: 5060685

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Dayco Serpentine Belt P/N:5060685

$40.99

Description

Keep the alternator, A/C compressor, fan, water pump, and power steering pump turning with the DAYCO drive belt 5060685, a 6-rib K-Section poly-rib serpentine belt that routes over the engine's accessory pulleys to transfer crankshaft power. It installs as a direct-fit replacement across a wide range of listed applications, including the 2020-2023 Jeep Wrangler [V6-3.0L], 2021-2023 Jeep Gladiator [V6-3.0L], 1996-1999 BMW 318i [L4-1.9L], 1995-1996 Mercury Mystique [L4-2.0L], 1994-1998 Pontiac Grand Am [V6-3.1L], and 1988-1995 Ford F-250 [V8-7.5L] — see the Buyer's Guide tab for the full list.

Construction: EPDM, aramid-reinforced belt in black.
Profile: 6 straight ribs, K-Section, .82 in top width, with standard rib depth.
Length: 68.50 in / 1739.90 mm effective length (69.16 in / 1756.67 mm outside circumference).
Rated: built to SAE J1459 and SAE J2432, with an operating range of -45°F to 212°F (-42.7°C to 100°C).

This DAYCO polyrib belt drives the main accessory system, and cracked, glazed, chirping, or squealing ribs are common signs a serpentine belt may need replacing. Made in Mexico. Sold individually.

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

Frequently Asked Questions

What is DAYCO drive belt 5060685?

It is a 6-rib, K-Section poly-rib serpentine belt that routes over the engine's accessory pulleys to drive components such as the alternator, A/C compressor, fan, water pump, and power steering pump.

Does this belt fit a Jeep Wrangler?

Yes. It is listed as a direct-fit replacement for the 2020-2023 Jeep Wrangler [V6-3.0L] and 2021-2023 Jeep Gladiator [V6-3.0L]. Check the Buyer's Guide tab to confirm your exact vehicle and engine.

What is this DAYCO serpentine belt made of?

The belt is built from EPDM with aramid reinforcement and is black. It has 6 straight ribs in a K-Section profile with a .82 in top width.

How long is the belt?

It has a 68.50 in (1739.90 mm) effective length and a 69.16 in (1756.67 mm) outside circumference, with standard rib depth.

When should a serpentine belt be replaced?

Cracked, glazed, chirping, or squealing ribs are common signs a serpentine belt may need replacing. Diagnose the cause before installing to rule out a worn tensioner or pulley.