Dayco Serpentine Belt P/N:5070668
Dayco 5071195 serpentine belt for the 1994 Ford F-250 V8 7.3L and other vehicles drives the engine's belt-driven accessories from a single loop. This Dayco drive belt runs on the main drive.
Cracks across the ribs, fraying, glazed ribs or a squeal at start-up can mean the belt is worn. Before you replace the belt, rule out a seized accessory pulley, a weak tensioner or pulley misalignment as the source of the noise or wear.
It fits the 1994 Ford F-250 V8 7.3L, the 1994 Ford F-350 V8 7.3L and the 1994 Ford F-59 Commercial Stripped Chassis, and each takes one belt. It is a direct-fit replacement for these vehicles.
Fit and size
Build and materials
Interchange: JK7-1201 · 25-071194
7K1194 · 7PK3035 · K071194 · 4071195 · 1195K7
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Dayco 5071195 the serpentine belt for the 1994 Ford F-250 V8 7.3L?
Yes. Dayco 5071195 fits the 1994 Ford F-250 V8 7.3L, and that truck takes one belt.
Is this Dayco serpentine belt made of EPDM?
Yes. This serpentine belt is EPDM with aramid reinforcement, in a K-section straight rib profile with standard rib depth.
What operating temperatures does this K-section belt handle?
Its operating range runs from -42.7 °C to 100 °C, which is -45 °F to 212 °F.
Does Dayco 5071195 replace belt number 7PK3035?
Yes. 7PK3035 is one of the numbers Dayco 5071195 replaces, along with JK7-1201 and K071194.
What wear should I look for on a main drive belt with straight ribs?
With the engine off and cool, look for cracks across the ribs, fraying or glazed ribs. A squeal at start-up can also point to a worn belt.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.