Delphi HM10016 direct injection high pressure fuel pump for the 2010-2014 Hyundai Sonata 4-cylinder 2.4L, the 2011-2013 Sonata 4-cylinder 2.0L and other vehicles builds rail pressure for a gasoline direct injection (GDi) system by sending fuel to the engine at high pressure. It is mechanically driven and meets OE specifications.
- Delivers fuel at high pressures that range from 2,000 to 2,800 PSI
- Mechanically driven high fuel flow pump builds rail pressure quickly for fast start times
- Fuel goes directly into the engine combustion chamber for increased horsepower and fuel economy
Quick facts
- Part: Delphi HM10016 direct injection high pressure fuel pump
- Fits: 2010-2014 Hyundai Sonata 4-cylinder 2.4L, the 2011-2013 Sonata 4-cylinder 2.0L and other vehicles
- Condition: New
A weak pump can show up as long cranking, hard starting, a stumble under load or a check engine light. Before you replace the pump, rule out a weak fuel supply, a clogged filter, a bad injector or a sensor fault, since each of those can look much the same from the driver's seat.
Fits
This pump is listed for a wide range of Hyundai and Kia models, including the 2012-2014 Kia Sorento 4-cylinder 2.4L and the 2011-2013 Kia Optima 4-cylinder 2.0L or 2.4L. Drivers of other models can look up their year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Engine codes: L4-2.0L, L4-2.4L
- Operating pressure: 2,000 to 2,800 PSI
Build and materials
- Type: gasoline direct injection (GDi) high pressure fuel pump
- Drive: mechanical
- Condition: New
In the box
One direct injection high pressure fuel pump and one instruction sheet. This listing is one pump, and each vehicle takes one.
Interchange: 35320-2G720 · 35320-2G730
4032019 · CHM10016 · M73118 · HP16410 · FI1509 · GDP401
This part cross-references / interchanges with the following part numbers:
4032019, CHM10016, M73118, 35320-2G720, 35320-2G730, HP16410, FI1509, GDP401
Frequently Asked Questions
Does Delphi HM10016 fit the 2012-2014 Kia Sorento 4-cylinder 2.4L?
Yes. Delphi HM10016 is listed for the 2012-2014 Kia Sorento 4-cylinder 2.4L, and the "Vehicles it fits" section covers other years and engines.
What comes in the box with the Delphi HM10016 fuel pump?
The box holds one direct injection high pressure fuel pump and one instruction sheet. This listing is a single pump, and each vehicle takes one.
What fuel pressure can this direct injection pump deliver?
This high pressure fuel pump delivers fuel at pressures that range from 2,000 to 2,800 PSI. It is mechanically driven, so rail pressure builds quickly for fast start times.
Can a failing high pressure fuel pump cause long cranking on a GDi engine?
Yes, it can be one cause of long cranking, hard starting or low power, but other fuel and sensor faults look similar. Testing fuel pressure on a running system is a job for a shop.
Is 35320-2G720 an interchange number for this Delphi pump?
Yes. 35320-2G720 is on the Interchange line for Delphi HM10016, along with 35320-2G730 and the other cross-reference numbers.
