Electric Fuel Pump for 1988-1995 Chevrolet C1500 & More - Delphi FE0115

Be the first to review this product
$76.99
WARNING:California Proposition 65▾
MPN: FE0115
UPC: 689604219232
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Delphi Electric Fuel Pump P/N:FE0115
Delphi Electric Fuel Pump P/N:FE0115
$76.99

Delphi FE0115 electric fuel pump for the 1988-1995 Chevrolet C1500 V6 4.3L, V8 5.0L or 5.7L, the 1990-1993 C1500 V8 7.4L and other vehicles moves fuel from the tank to the engine. This in-tank Delphi electric fuel pump is validated, tested and matched to the right vehicle application.

  • Designed to operate in extreme temperatures with quick engine starts
  • Fast pressure performance and system integrity with less energy used for pumping
  • Lower amperage draw puts less load on the vehicle's electrical system

Quick facts

  • Part: Delphi FE0115 electric fuel pump
  • Fits: the 1988-1995 Chevrolet C1500 V6 4.3L, V8 5.0L or 5.7L, the 1990-1993 C1500 V8 7.4L and other vehicles
  • Position: In-tank
  • Condition: New

Hard starting, sputtering under load or stalling can mean the pump is worn, though a clogged fuel filter or a faulty fuel pump relay can bring on the same symptoms. A shop can test fuel pressure to sort out which one it is.

Fits

This pump is listed for a wide range of Chevrolet, GMC, Buick, Cadillac, Oldsmobile, Pontiac and Volvo models, led by the 1988-1995 Chevrolet K1500 V6 4.3L, V8 5.0L or 5.7L and the 1995 Chevrolet Tahoe V8 5.7L. The 1995 Chevrolet Tahoe V8 5.7L takes one pump.

Specifications

  • Position: In-tank
  • Quantity per vehicle: 1
  • Condition: New
  • Wire harness: 2-wire harness with connector assembly

In the box

One electric fuel pump, two hose clamps, a hose piece, an isolator, a torque limiting isolator, two seals, two splices, a 2-wire harness with connector assembly, a wire harness instruction sheet and an instruction sheet.

Installation notes

  • Check and clean the fuel tank before the new pump goes in.
  • Replace the fuel strainer whenever the fuel pump is repaired.
  • Follow the two instruction sheets in the package for the steps.

Frequently Asked Questions

Will the Delphi FE0115 fit a 1995 Chevrolet Tahoe V8 5.7L?

Yes. The Delphi FE0115 is listed for the 1995 Chevrolet Tahoe V8 5.7L. For any other car, look up its year and engine on the Buyer's Guide tab.

Does this Delphi electric fuel pump come with a wire harness and seals?

Yes. The Delphi FE0115 package has a 2-wire harness with connector assembly, two seals, two hose clamps, a hose piece, two splices, an isolator and a torque limiting isolator.

Is the FE0115 mounted inside the fuel tank?

Yes. This pump's catalog position is in-tank, so it works from inside the fuel tank.

What can hard starting or stalling mean for an electric fuel pump?

Hard starting, sputtering under load or stalling can mean the electric fuel pump is weakening. Fuel delivery problems are worth having looked at promptly rather than driven on.

Should the fuel strainer be replaced when installing the Delphi FE0115?

Yes. The strainer should be replaced with every fuel pump repair, and the fuel tank checked and cleaned first. Two instruction sheets come with the Delphi FE0115.