Delphi SS12000 crankshaft position sensor for the 2005-2008 Buick LaCrosse V6 3.6L and other vehicles reports crankshaft position to the engine computer. The Delphi crankshaft position sensor is built to OE requirements and calibrated to OE standards.
- Design that gives accurate readings across the gap between the sensor contact and the element
- Enhanced sensing functionality that helps reduce emissions and improve reliability and drivability
- Readings are not impacted by temperature changes
- Digital output designed for maximum signal to noise ratio
Quick facts
- Part: Delphi SS12000 crankshaft position sensor
- Also called: crank sensor
- Fits: 2005-2008 Buick LaCrosse V6 3.6L and other vehicles
- Condition: New
Hard starting, stalling or a check engine light can mean this crank sensor is worn, though the wiring harness or the engine computer can be behind the same signs, so find the cause before replacing it.
Fits
Listed for a wide range of Buick, Cadillac and Saab models, it is a crankshaft position sensor for the 2004-2007 Cadillac CTS V6 3.6L and the 2005-2007 CTS V6 2.8L, and for the 2006-2009 Saab 9-3 V6 2.8L. To check your own model and engine, open the Buyer's Guide tab.
Specifications
Fit and size
- Quantity per vehicle: 1
- Engines: V6-2.8L, V6-3.6L
Build and materials
- Output: digital
- Condition: New
In the box
One crankshaft position sensor and one instruction sheet. This listing holds one sensor, and one is all the car needs.
Interchange: 12 56 6848 · 12 58 2652
CSS1501 · CSS9060 · PC501 · 5S6619 · SU8128
This part cross-references / interchanges with the following part numbers:
CSS1501, CSS9060, 12 56 6848, 12 58 2652, PC501, 5S6619, SU8128
Frequently Asked Questions
Is this a Saab 9-3 crankshaft position sensor for the 2006-2009 model with the V6 2.8L?
Yes. Delphi SS12000 is listed for the 2006-2009 Saab 9-3 V6 2.8L. For another model or engine, open the Buyer's Guide tab.
Does the Delphi crankshaft sensor come with an instruction sheet?
Yes. The Delphi SS12000 comes with one crankshaft position sensor and one instruction sheet.
What kind of signal does this crankshaft position sensor send?
The output is digital, and the signal is designed for maximum signal to noise ratio. The sensor's design reads accurately from the gap between its contact and the element.
What symptoms can a worn crankshaft position sensor cause?
An engine that cranks but won't start, a rough idle or a stored crankshaft position code can mean the sensor is worn. A shop can read the codes and test the sensor circuit.
Can the Delphi SS12000 replace a sensor numbered PC501?
Yes. PC501 is among the numbers this sensor replaces, along with CSS1501 and SU8128. Every number is on the Interchange line.
