Delphi FE0725 fuel pump and strainer set for the 1997-2001 BMW 740i V8 4.4L and other vehicles delivers fuel from the tank to the engine. This Delphi fuel pump is built to Delphi's OE standards.
- Delphi pump designed to operate under extreme temperatures with quick engine starts
- Lower amperage draw, which puts less load on the vehicle's electrical system
- Fast pressure performance and system integrity through less energy
- Validated and tested before it is matched to its application
Quick facts
- Part: Delphi FE0725 fuel pump and strainer set
- Fits: 1997-2001 BMW 740i V8 4.4L and other vehicles
Before you replace the pump, rule out a clogged fuel filter, a dirty tank or a wiring fault, because hard starting, stalling or a whine from the tank can come from more than one place. If a failed fuel pump is the cause, this set replaces it along with the strainer.
Fits
It fits the 1997-2001 BMW 740i V8 4.4L, the 1995 BMW 740iL V8 4.0L and the 1996-2001 740iL V8 4.4L, and the 1995-2001 BMW 750iL V12 5.4L.
Specifications
- Type: fuel pump and strainer set
- Quantity per vehicle: 1
In the box
One fuel pump and strainer set with a seal, a clamp and an instruction sheet. The listing holds one set, and each BMW model above takes one.
Installation notes
- Check and clean the fuel tank before the new pump goes in.
- Replace the fuel strainer any time the fuel pump is repaired; a strainer is part of this set.
- The instruction sheet in the box covers the steps.
Interchange: 16 14 1 183 947 · E22-041-080Z
E8385 · CFE0725 · 67898 · P72132 · AFS1074P · A33190 · E16285 · E18526 · SP1262 · USEP8385
This part cross-references / interchanges with the following part numbers:
E8385, CFE0725, 16 14 1 183 947, 67898, P72132, AFS1074P, A33190, E16285, E18526, SP1262, USEP8385, E22-041-080Z
Frequently Asked Questions
Does Delphi FE0725 work as a BMW 740i fuel pump for a 1997-2001 V8 4.4L?
Yes. Delphi FE0725 fits the 1997-2001 BMW 740i V8 4.4L, and that car takes one set.
Does the Delphi fuel pump assembly FE0725 come with a seal and clamp?
Yes. Delphi FE0725 includes a seal, a clamp and an instruction sheet along with the fuel pump and strainer set.
Why is a strainer included with this fuel pump?
The strainer is part of the set because the old one should be changed whenever the pump is serviced, so a new one comes with the pump.
What should I check on the tank during a Delphi fuel pump replacement?
Inspect the fuel tank and clean it as part of the pump job. The instruction sheet in the set covers the installation steps.
Does Delphi FE0725 have a lower amperage draw?
Yes. Delphi FE0725 draws lower amperage, which means less load on the vehicle's electrical system.
