Delphi FG0340 fuel pump module for the 2004-2005 Chevrolet Silverado 1500 V8 4.8L, 5.3L or 6.0L, the 2005 Silverado 1500 V6 4.3L and other vehicles sends fuel from the tank to the engine. This Delphi fuel pump module assembly, also called a fuel pump assembly, is built to Delphi's OE standards.
- Empty float height and float retention are set to match the specifications for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested, then matched to a specific vehicle application
- Design and durability aimed at lower failure rates
Quick facts
- Part: Delphi FG0340 fuel pump module
- Also called: fuel pump assembly
- Fits: the 2004-2005 Chevrolet Silverado 1500 V8 4.8L, 5.3L or 6.0L, the 2005 Silverado 1500 V6 4.3L and other vehicles
- Condition: New
Hard starting, stalling or a gas gauge that reads wrong can point to the module, but wiring and fuses produce those symptoms too. With the engine off and cool, look over the fuel pump fuse and its connector for damage first; a shop can run the pressure test.
Fits
This is a direct-fit fuel pump module for the 2004-2005 GMC Sierra 1500 V8 4.8L, 5.3L or 6.0L, the 2005 Sierra 1500 V6 4.3L and the 2007 Chevrolet Silverado 2500 HD Classic V8 6.0L or 8.1L. Each truck takes one. If your truck is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel pump module with float arm, a seal and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the new module.
- The instruction sheet that comes with the part gives the steps.
Frequently Asked Questions
Does this Delphi module fit the 2007 Chevrolet Silverado 2500 HD Classic V8 6.0L or 8.1L?
Yes. Delphi FG0340 fits the 2007 Chevrolet Silverado 2500 HD Classic with the V8 6.0L or V8 8.1L, one per truck. For other trucks, open the "Vehicles it fits" section.
Does the Delphi fuel module come with the float arm and seal?
Yes. Delphi FG0340 comes as a fuel pump module with the float arm, a seal and an instruction sheet.
Does this fuel pump module match the float height needed for a correct gas gauge reading?
Yes. Its empty float height and float retention match OE specifications, which gives a correct gas gauge reading.
Do I need to clean the tank before installing this fuel pump module?
Yes. Check and clean the fuel tank before the new module goes in. The instruction sheet that comes with the part covers the steps.
Does this fuel pump module put less load on the electrical system?
Yes. Delphi FG0340 has a lower amperage draw, so it asks less of the vehicle's electrical system.
