Delphi FG2711 fuel pump module for the 2019-2025 BMW X5 6-cylinder 3.0L and other vehicles supplies fuel from the tank to the engine. The empty float height and float retention of this Delphi fuel pump module assembly match OE specifications, and the pump is built to Delphi's OE standards.
- Float arm with set empty height and float retention for correct gas gauge readings
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated, tested and matched to the right vehicle application
- Design and durability that lower failure rates
Quick facts
- Part: Delphi FG2711 fuel pump module
- Also called: fuel pump assembly
- Fits: 2019-2025 BMW X5 6-cylinder 3.0L and other vehicles
- Condition: New
Sputtering under load, a loss of power or a gas gauge that reads wrong can mean the pump or float is wearing out. Before you replace the module, rule out a clogged fuel filter, a dirty tank and wiring or relay faults, since those can show similar symptoms. You need one module per vehicle.
Fits
Delphi FG2711 is a direct-fit replacement for the 2019-2025 BMW X5 6-cylinder 3.0L, the 2019-2025 BMW X7 6-cylinder 3.0L and the 2020-2025 BMW X6 6-cylinder 3.0L.
Specifications
Fit and size
- Engine: L6-3.0L
- Quantity per vehicle: 1
Build and materials
- Type: fuel pump module assembly with float arm
- Condition: New
- Country of origin: Thailand
In the box
One fuel pump module with float arm, one seal and one instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the module.
- The instruction sheet that comes with the part covers the steps.
Interchange: 16 11 7 467 658
16119468618
This part cross-references / interchanges with the following part numbers:
16 11 7 467 658, 16119468618
Frequently Asked Questions
Is this Delphi fuel pump module right for the 2020-2025 BMW X6 6-cylinder 3.0L?
Yes. Delphi FG2711 is listed for the 2020-2025 BMW X6 6-cylinder 3.0L (L6-3.0L), and each vehicle takes one module.
What comes with this Delphi fuel module?
Delphi FG2711 comes with a float arm, a seal and an instruction sheet along with the pump module itself.
Does this Delphi module give a correct gas gauge reading?
Yes. The empty float height and float retention match OE specifications, which is meant to give a correct gas gauge reading.
Which signs can mean the pump or float in a fuel pump assembly is wearing out?
A long crank, a stall or a fuel gauge that jumps around can mean the pump or float is wearing out. A shop can run a fuel pressure test to confirm.
Is 16119468618 an interchange number for Delphi FG2711?
Yes. 16119468618 is listed as an interchange number that Delphi FG2711 replaces.
