Delphi TA1071 left outer tie rod end for the 1995-1998 Audi A6 and other vehicles joins the steering linkage to the steering knuckle, which carries your steering input to the wheel. This Delphi tie rod end is fatigue tested to avoid failure.
- A Delphi tie rod gets ball studs machined to micron tolerances, for durability and smooth joint operation.
- Anti-corrosion protection is applied to each part.
- Dimensional and material analysis is meant to give close compatibility with the OE part.
- Withstands temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray.
A worn steering tie rod end can show up as loose or wandering steering or uneven front tire wear, though those signs can also trace back to other steering and suspension parts. With the engine off, look the joint over for rust, cracks or a torn dust boot before you decide. The car takes one on each side of the steering, so plan to fit the right one along with this left one.
The fitment spans a wide range of Audi models, including the 1995-1998 Audi A6 Quattro and the 1995-1997 Audi S6. If your Audi isn't named here, enter its year and model on the Buyer's Guide tab to see whether it is covered.
Specifications
- Position: Left outer
- Quantity per vehicle: 1
In the box
Includes the accessories needed for a complete job.
Interchange: 101-3922 · 401-1520
443 419 811 D · 534417 · ER02062 · KTR4393 · T2753 · T2753PR · ES2753 · GES2753 · MES2753 · JTE141
This part cross-references / interchanges with the following part numbers:
443 419 811 D, 101-3922, 534417, ER02062, KTR4393, T2753, T2753PR, ES2753, GES2753, MES2753, 401-1520, JTE141
