Delphi Suspension Ball Joint P/N:TC5287
Keep the front suspension tight and precise with the Delphi ball joint TC1886, a front lower joint that connects the lower control arm to the steering knuckle so the wheel can move through its travel and steer while staying located. It fits the 1999-2001 SAAB 9-5; see the Buyer's Guide tab for engine-level details.
Delphi carries its OE safety expertise into its aftermarket steering and suspension range, testing to the extreme for OE-level performance — parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt spray, with extensive dimensional and material analysis to closely match the OE part.
A worn front lower ball joint can show up as clunking over bumps, steering wander, or uneven front tire wear. If a failed ball joint is the cause, this is the direct-fit replacement for the listed application.
Interchange: 101-4828 · SA-F202 · 505-1464 · 48 35 740 · 52 31 683
1014828 · SAF202 · 5051464 · 4835740 · 5231683 · BJ07048 · BJ36035 · BJ36035PR · K500099 · FA2421E · MK6713 · MS10549 · MS50506 · 32064987 · JBJ100
This part cross-references / interchanges with the following part numbers:
What vehicle does this Delphi ball joint fit?
It is a direct-fit replacement for the 1999-2001 SAAB 9-5. Check the Buyer's Guide tab to confirm the exact application for your vehicle.
Where is this ball joint located?
It is the front lower ball joint, connecting the lower control arm to the steering knuckle so the wheel can move and steer while staying located.
What are signs I need a new Saab 9-5 ball joint?
Clunking over bumps, steering wander, or uneven front tire wear can indicate a worn ball joint. Have the cause diagnosed, since these symptoms can have other sources.
How is this Delphi ball joint built?
It uses high-quality forgings for strength, a chloroprene rubber boot for durability, micron-tolerance machining for smooth operation, and anti-corrosion protection.
Has this part been tested for durability?
Delphi tests to OE-level extremes, including temperatures below -40°C and over 120°C and 720 hours of salt spray, with dimensional and material analysis to match the OE part.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.