Delphi Suspension Ball Joint P/N:TC1910
Help keep the front suspension pivoting smoothly with the Delphi TC1989 front lower ball joint, a direct-fit replacement for the 2008-2012 Nissan Rogue, 2003-2007 Nissan Murano and 2004-2009 Nissan Quest. This Delphi ball joint is the pivot between the lower control arm and the steering knuckle. It lets the wheel travel and turn while holding it in position. See the Buyer's Guide tab for complete application details.
Delphi applies the expertise behind its OE safety technology, which is fitted to millions of vehicles worldwide, to its aftermarket steering line. Delphi tests these parts to the extreme: they withstand temperatures below -40°C and above 120°C and are exposed to 720 hours of salt spray. Delphi also carries out extensive dimensional and material analysis for close compatibility between the OE part and the aftermarket part.
A front lower ball joint may need replacing if you notice any of these signs:
Inspect the suspension to confirm the cause before you replace parts. Having the wheel alignment checked after installation is good practice.
Interchange: 102-6559 · 610.42011 · 54500-4BA0A · 54500-4CA0A · 54500-CK000 · 54500-JD000 · 54501-4BA0A · 54501-4CA0A · 54501-JD000 · 521-080
1026559 · 61042011 · 545004BA0A · 545004CA0A · 54500CK000 · 54500JD000 · 545014BA0A · 545014CA0A · 54501JD000 · 521080 · 545004CUA0 · 545014CUA0 · BJ69225 · CB69134 · CB69134PR · CK620561 · K500129 · RK620561 · MS30504 · MS30518 · JBJ225
This part cross-references / interchanges with the following part numbers:
Is the Delphi TC1989 the right ball joint for a 2008-2012 Nissan Rogue?
It is a direct-fit front lower ball joint for the 2008-2012 Nissan Rogue, 2003-2007 Nissan Murano and 2004-2009 Nissan Quest. Check the Buyer's Guide tab for your exact vehicle.
What does a suspension ball joint do?
It is the pivot point between the lower control arm and the steering knuckle. It lets the wheel move up and down and steer while keeping it located.
What signs suggest a ball joint may need replacing?
Common signs include clunking over bumps, loose or wandering steering, uneven tire wear, and a torn boot or play in the joint. Inspect the suspension to confirm the cause before replacing parts.
How is the Delphi TC1989 built?
It is made from high-quality forgings and machined to micron tolerances. It has a chloroprene rubber boot, and anti-corrosion protection is applied to each part.
How does Delphi test its steering parts?
Delphi states its steering parts withstand temperatures below -40°C and above 120°C. They are also exposed to 720 hours of salt spray testing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.