Keep your front suspension linked to the chassis with the Delphi control arm TC1043, a front left upper control arm and ball joint assembly whose built-in ball joint lets the wheel pivot for steering and suspension travel. It fits many vehicles, among them the 1994-1997 Honda Accord, 1995-1998 Honda Odyssey and 1997-1999 Acura CL, as a direct-fit replacement for the listed applications. See the Buyer's Guide tab for the full list.
Delphi's OE safety technology is fitted to millions of vehicles worldwide, and the company brings that OE expertise to its aftermarket steering portfolio. Delphi parts are tested at below -40°C and above 120°C and go through 720 hours of salt spray. Delphi uses extensive dimensional and material analysis to aim for the best compatibility between the OE part and the aftermarket part.
If you need a 1994-1997 Honda Accord upper control arm for the left front, this assembly replaces the arm and ball joint in one piece. Signs this part may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear and play in the ball joint. Diagnose the cause first, because other components can produce the same symptoms. It is sold individually for the front left upper position, and replacing the left and right arms together is recommended.
Interchange: 101-4376 · 102-4376 · 623.40067 · 520-627 · 51460-SV4-000 · 51460-SV4-A00
1014376 · 1024376 · 62340067 · 520627 · 51460SV4000 · 51460SV4A00 · CB90447 · CB90447PR · CK90447 · K200358 · K90447 · K90458 · RK90447 · CMK90447 · GK90447 · MK90447 · JTC693
This part cross-references / interchanges with the following part numbers:
Will this 1994-1997 Honda Accord control arm fit my car?
The TC1043 is listed for the front left upper position on the 1994-1997 Honda Accord. Check the Buyer's Guide tab to confirm your exact vehicle.
Can I use it as a 1995-1998 Honda Odyssey control arm?
Yes. It is also listed for the 1995-1998 Honda Odyssey and the 1997-1999 Acura CL, among other vehicles. The Buyer's Guide tab has the full list.
What does a control arm with ball joint do?
It links the wheel's steering knuckle to the vehicle's chassis. The ball joint lets the knuckle pivot as the wheel steers and the suspension moves.
How does Delphi test the TC1043?
Delphi control arms get 100% crack detection and ultrasonic flaw detection. Delphi parts are also tested at below -40°C and above 120°C and through 720 hours of salt spray.
What are signs the upper control arm may need replacing?
Common signs are clunking over bumps, loose or wandering steering, uneven tire wear and play in the ball joint. Diagnose the cause first, since other parts can cause the same symptoms.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
