Delphi TC1578 front left lower control arm with ball joint for the 2002-2005 Kia Sedona connects the wheel assembly to the body and lets the wheel pivot. As a control arm and ball joint assembly, it replaces the arm and the joint together in one piece.
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durable, smooth joint operation
- Robot-welded control arm for consistent quality
- Anti-corrosion protection applied to each part
- Tested at temperatures below -40 °C and over 120 °C and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC1578 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2002-2005 Kia Sedona
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven tire wear or loose, wandering steering can mean this control arm or its ball joint is worn, though a worn tie rod end or a tired strut mount can bring on similar signs.
Fits
This is a direct-fit replacement for the 2002-2005 Kia Sedona, which takes one on the front left. The listing is one arm; the front right is a separate part, and the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1
Build and materials
- Type: control arm with ball joint
- Finish: anti-corrosion protection on each part
- Condition: New
Interchange: 101-5140 · 102-5140 · KI-H201 · 521-407 · 0K552-34-350B · 0K552-34-350C
CB63023 · CB63023PR · CK620042 · K620042 · RK620042 · CMS90148 · GS90148 · MS90148 · JTC1505 · JTC1855
This part cross-references / interchanges with the following part numbers:
101-5140, 102-5140, KI-H201, 521-407, 0K552-34-350B, 0K552-34-350C, CB63023, CB63023PR, CK620042, K620042, RK620042, CMS90148, GS90148, MS90148, JTC1505, JTC1855
Frequently Asked Questions
Does the Delphi TC1578 control arm fit the 2002-2005 Kia Sedona?
Yes. Delphi TC1578 is a front left lower control arm with ball joint for the 2002-2005 Kia Sedona. The front right side is a separate part.
Is this lower control arm for the left or the right front wheel?
This control arm is for the front left wheel, lower position. The front right needs its own control arm.
How is the Delphi TC1578 control arm tested and protected?
Each arm gets 100% crack and ultrasonic flaw detection, and the ball studs are machined to micron tolerances. The parts are tested below -40 °C and over 120 °C and exposed to 720 hours of salt spray.
How can I tell if a lower control arm ball joint is worn?
Cracks or rust on the arm, a clunk over bumps or uneven tire wear can point to wear. Joint play needs a proper lift, so have a shop test it.
Is Delphi TC1578 a replacement for part number CK620042?
Yes. CK620042 is one of the numbers Delphi TC1578 replaces, along with 101-5140 and 521-407. The full cross-reference is on the Interchange line.
