Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2329

Be the first to review this product
$98.99
MPN: TC2329
UPC: 689604256961
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2329
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2329
$98.99

Tighten up your BMW's front end with the Delphi control arm and ball joint assembly, MPN TC2329. It installs as a direct-fit replacement in the front right upper position on the 2007-2014 BMW X5 and 2008-2014 BMW X6 — see the Buyer's Guide tab for engine-level fitment. The control arm locates the wheel and connects the knuckle to the chassis, while the integrated ball joint lets the suspension travel and the wheel steer.

  • OE-validated testing: withstands temperatures below -40°C and above 120°C plus 720 hours of salt spray, with Delphi's dimensional and material analysis for close OE-to-aftermarket compatibility.
  • Inspected to OE specs: each arm gets 100% crack detection and ultrasonic flaw detection so the material matches OE specifications.
  • Precision joint: the ball studs are machined to micron tolerances for durability and smooth joint operation.
  • Built to endure: robot-welded for consistent quality, with anti-corrosion protection applied to each part for corrosion prevention and enhanced appearance.

Clunking over bumps, steering wander, or uneven front tire wear can be signs the original arm's bushings or ball joint are worn; if that assembly is the cause, this TC2329 replaces it.

Interchange: 3112 6776 418 · 101-7503 · 102-7503
31126776418 · 1017503 · 1027503 · 521516 · CB14028 · CB14028PR · K620975 · RK620975 · RK620976 · CMS101058 · GS101058 · JTC1208

This part cross-references / interchanges with the following part numbers:

3112 6776 418, 101-7503, 102-7503, 521516, CB14028, CB14028PR, K620975, RK620975, RK620976, CMS101058, GS101058, JTC1208

Frequently Asked Questions

What is the Delphi TC2329 control arm and ball joint assembly?

It's a front right upper suspension control arm with an integrated ball joint that locates the wheel, connects the knuckle to the chassis, and lets the suspension travel and the wheel steer.

Does this fit my Bmw X5 control arm application?

It's a direct-fit replacement for the front right upper position on the 2007-2014 BMW X5 and 2008-2014 BMW X6. Check the Buyer's Guide tab for engine-level fitment for your vehicle.

What are the signs this part may need replacing?

Clunking over bumps, steering wander, or uneven front tire wear can point to worn control arm bushings or a worn ball joint. Diagnose the cause first, since these symptoms can have other sources.

How is the Delphi ball joint made?

Delphi machines the ball studs to micron tolerances for durability and smooth joint operation, and the arm is robot-welded and inspected with 100% crack and ultrasonic flaw detection.

Is the assembly protected against corrosion?

Yes. Anti-corrosion protection is applied to each part for corrosion prevention and enhanced appearance, and the part is validated through 720 hours of salt spray plus extreme-temperature testing.