Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2590
Delphi TC2402 front left lower control arm with ball joint for the 2001-2006 Hyundai Elantra and other vehicles holds the front left wheel to the chassis and lets it move with the suspension. It is a control arm and ball joint assembly, so the ball joint comes with the arm.
A clunk over bumps, loose steering or uneven front tire wear can come from a worn arm or ball joint, though other suspension parts cause the same signs, so find the cause first. With the engine off, look for a torn boot, cracks or heavy rust.
This front left lower control arm fits the 2001-2006 Hyundai Elantra, the 2004-2009 Kia Spectra and the 2005-2009 Kia SPECTRA5, among others. These cars take one arm on the front left. Front lower arms are normally replaced as a left and right pair; this listing is one arm, and the front right is a separate part. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
Is this a Hyundai Elantra control arm for 2001-2006 models, and which side does it go on?
Yes. Delphi TC2402 is the front left lower control arm with ball joint for the 2001-2006 Hyundai Elantra. It also fits the 2004-2009 Kia Spectra.
Does this control arm come with the ball joint already on it?
Yes. This front left lower arm is an assembly with the ball joint included, so you do not order the joint separately.
What tests does the Delphi control arm go through?
This control arm withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray. Each arm also gets 100% crack detection and ultrasonic flaw detection.
Can a clunk over bumps mean the front left control arm is worn?
Yes, it can, as can loose steering or uneven front tire wear. Other suspension parts cause the same signs, so a shop can measure the joint for play.
How are the ball studs on Delphi TC2402 made?
Delphi TC2402 has ball studs machined to micron tolerances for durability and smooth joint operation. The arm itself is robot-welded and has anti-corrosion protection.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.