Front Left Lower Control Arm with Ball Joint for 2018-2021 Toyota C-HR - Delphi TC4697

$208.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: TC4697
    UPC: 689604403686
    Condition: New
    Weight: 17.40 LBS
    Item Package Quantity: 1
    $208.99
    Adding to cart… The item has been added

    Have questions?

    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC4697
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC4697
    $208.99
    $208.99

    Delphi TC4697 front left lower control arm with ball joint for the 2018-2021 Toyota C-HR locates the wheel and lets it move with the suspension. The Delphi control arm and ball joint assembly comes as one piece with the joint attached.

    • Control arm withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray
    • Every control arm gets 100% crack detection and ultrasonic flaw detection
    • Ball studs are machined to micron tolerances for durability and smooth joint operation
    • Robot welding gives the control arm consistent weld quality
    • Anti-corrosion protection is applied to each part

    Quick facts

    • Part: Delphi TC4697 control arm with ball joint
    • Also called: control arm and ball joint assembly
    • Fits: 2018-2021 Toyota C-HR
    • Position: Front Left Lower
    • Condition: New

    A worn control arm or ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven front tire wear. Before you replace this arm, rule out the sway bar links, strut mounts and tie rod ends, since worn parts there can produce similar noises and handling changes.

    Fits

    This arm fits the 2018-2021 Toyota C-HR, which takes one on the front left. This listing is one arm; the front right is a separate part, and both sides are normally replaced together.

    Specifications

    Fit and size

    • Position: Front Left Lower
    • Quantity per vehicle: 1

    Build and materials

    • Type: control arm with ball joint assembly
    • Ball studs: machined to micron tolerances
    • Finish: anti-corrosion protection
    • Condition: New

    Interchange: 526-201 · 48069-F4010
    KSC4224 · CMS861323

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    526-201, KSC4224, CMS861323, 48069-F4010

    Frequently Asked Questions

    Is the Delphi TC4697 control arm with ball joint right for the 2018-2021 Toyota C-HR?

    Yes. Delphi TC4697 is the front left lower control arm with ball joint for the 2018-2021 Toyota C-HR, and the C-HR takes one on this side.

    How are the ball studs on this front left lower control arm made?

    The ball studs are machined to micron tolerances, which is meant to give the joint durability and smooth operation.

    What temperature and salt spray testing do these control arms go through?

    The parts withstand temperatures below -40 degrees C and over 120 degrees C, and they are exposed to 720 hours of salt spray.

    Does Delphi TC4697 replace 48069-F4010?

    Yes. 48069-F4010 is one of the numbers Delphi TC4697 replaces, along with 526-201, KSC4224 and CMS861323.

    How is this control arm inspected and welded?

    Each control arm undergoes 100% crack detection and ultrasonic flaw detection, and it is assembled with robot welding for consistent quality.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review