Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC7893
$114.99
(You save)
Keep steering tight and suspension geometry true with the Delphi control arm and ball joint assembly, part number TC7893. This front left lower unit drops in as a direct-fit replacement for the 2014-2019 Kia Soul [All] and the 2015-2019 Kia Soul EV [All], locating the wheel while its integrated ball joint allows the steering and suspension to move together. Shoppers weighing Delphi control arm reviews will find each assembly is built with Delphi's OE steering expertise and validated against the original part.
Tested to the extreme: withstands temperatures below -40°C and above 120°C, plus 720 hours of salt-spray exposure.
Quality-verified: 100% crack detection and ultrasonic flaw detection help confirm the material matches OE specifications.
Precision joint: ball studs machined to micron tolerances for durable, smooth joint operation.
Built to last: robot-welded for consistent quality, with anti-corrosion protection applied for corrosion resistance and cleaner looks.
If a worn control arm or ball joint is behind clunking over bumps, wandering steering, or uneven tire wear, this assembly replaces the failed original. Country of origin: Turkey.
It is a front left lower control arm and ball joint assembly for the 2014-2019 Kia Soul [All] and the 2015-2019 Kia Soul EV [All]. Check the Buyer's Guide tab to confirm your vehicle.
Is the ball joint included with this control arm?
Yes. The ball joint is pre-assembled into the control arm, so you install both as a single unit.
What are the signs this control arm may need replacing?
Clunking or knocking over bumps, loose or wandering steering, and uneven tire wear can point to a worn control arm or ball joint. Diagnose the cause before replacing.
How is the Delphi control arm tested?
Delphi validates it to extremes: below -40°C and above 120°C, with 720 hours of salt spray, plus 100% crack detection and ultrasonic flaw detection to match OE specifications.
Where is the Delphi TC7893 made?
Country of origin: Turkey.
Write a Review
Delphi
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC7893
Dial in precise, quiet front-end geometry with the Delphi control arm and ball joint assembly (P/N: TC1666), a direct-fit front left upper unit for the 1989-1997 Ford Thunderbird and 1989-1997...
Tighten up your front end and steer with confidence using the Delphi control arm — the Suspension Control Arm and Ball Joint Assembly TC5343. This front left upper control arm and ball joint assembly...
Fit your Delphi control arm with confidence: the Delphi Suspension Control Arm and Ball Joint Assembly TC5428 mounts in the front right upper position and locates the wheel while the integrated ball...
Tighten up your front suspension with the DELPHI control arm TC6252, a Suspension Control Arm and Ball Joint Assembly that installs as the front right lower forward unit and drops in as a direct-fit...
Keep your front suspension located precisely and your ball joint working smoothly with the DELPHI control arm (MPN TC6275), a front right lower control arm and ball joint assembly engineered as a...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
