Delphi TC8972 front right lower control arm with ball joint for the 2013-2017 Nissan Leaf connects the wheel assembly to the chassis. This Delphi control arm and ball joint assembly is one part, with the ball joint already attached to the arm.
- Tested at temperatures below -40 degrees C and over 120 degrees C, and for 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC8972 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2013-2017 Nissan Leaf
- Position: Front right lower
- Condition: New
A clunk over bumps, loose steering or uneven front tire wear can mean a worn control arm or ball joint. Worn sway bar links, struts, a tie rod end or a wheel bearing can be behind those signs too, so find out which one is at fault before you buy.
Fits
This is a direct-fit replacement control arm for the 2013-2017 Nissan Leaf, made for the front right lower position.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1 for this side
Build and materials
- Type: control arm with ball joint assembly
- Construction: robot-welded
- Finish: anti-corrosion protection
- Condition: New
In the box
One front right lower control arm with ball joint. The 2013-2017 Nissan Leaf takes one on this side, and the front left is a separate part ordered on its own; both sides are normally replaced together.
Interchange: 102-7696 · 54500-3NF0A · 522-914
CMS301222 · X36CJ1447
This part cross-references / interchanges with the following part numbers:
102-7696, 54500-3NF0A, 522-914, CMS301222, X36CJ1447
Frequently Asked Questions
Is the Delphi TC8972 the right control arm for the 2013-2017 Nissan Leaf?
Yes. Delphi TC8972 is a front right lower control arm with ball joint for the 2013-2017 Nissan Leaf. The front left side is a separate part.
Does this front right lower control arm come with the ball joint?
Yes. The ball joint is part of this assembly, so the listing is one front right lower control arm with the ball joint already in place.
How are the ball studs on the Delphi TC8972 made?
Delphi TC8972 has ball studs machined to micron tolerances. The arm itself is robot-welded and given anti-corrosion protection.
Can a clunk over bumps come from a worn lower control arm ball joint?
Yes, a clunk over bumps, loose steering or uneven front tire wear can mean a worn ball joint. A shop can check the joint for play, and a worn one should be replaced promptly.
Does the Delphi TC8972 interchange with 54500-3NF0A?
Yes. 54500-3NF0A is one of the numbers this Delphi TC8972 control arm replaces.
