Delphi TC9471 front right lower control arm with ball joint for the 2020-2025 Hyundai Palisade and other vehicles links the steering knuckle to the chassis. This Delphi control arm comes as a control arm and ball joint assembly, so the joint is already attached.
- Control arm withstands temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on the control arms
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC9471 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2020-2025 Hyundai Palisade and other vehicles
- Position: Front Right Lower
- Condition: New
A clunk over bumps, loose-feeling steering or uneven front tire wear can mean a worn ball joint or control arm. Sway bar links, struts, tie rod ends or a wheel bearing can be behind these signs too, so find the cause before buying.
Fits
It fits the 2020-2025 Hyundai Palisade and the 2020-2024 Kia Telluride. Each side of the front axle takes one arm; this listing is the front right, and the front left is a separate part that is normally replaced at the same time.
Specifications
Fit and size
- Position: Front Right Lower
- Quantity per application: 1
Build and materials
- Type: control arm with ball joint assembly
- Protection: anti-corrosion protection on each part
- Condition: New
- Country of origin: Turkey
Interchange: 54501S8100 · CMS901289 · GS901289 · X23CJ1642
This part cross-references / interchanges with the following part numbers:
54501S8100, CMS901289, GS901289, X23CJ1642
Frequently Asked Questions
Is the Delphi TC9471 the right control arm for the 2020-2024 Kia Telluride?
Yes. Delphi TC9471 is a front right lower control arm with ball joint for the 2020-2024 Kia Telluride, and it also fits the 2020-2025 Hyundai Palisade.
Which side does the Delphi TC9471 control arm go on?
It is the front right lower position. This listing is one arm, and the front left lower arm is ordered separately.
How much heat, cold and salt spray can this control arm take?
It withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
What can a worn ball joint on a control arm feel like?
Signs can include a clunk over bumps, loose-feeling steering or uneven front tire wear. A shop can test the joint for play.
Does Delphi TC9471 interchange with 54501S8100?
Yes. 54501S8100 is listed as an interchange number for Delphi TC9471, along with CMS901289, GS901289 and X23CJ1642.
