Delphi TD639W front upper control arm bushing kit for the 1987-1996 Dodge Dakota and other vehicles cushions the arm at its pivot points. The bushings are designed to OE standards.
- Manufactured for consistent service life
- Manufactured to reduce noise
- Helps restore the smooth ride of the vehicle
- Withstands temperatures below -40 °C and over 120 °C
- Exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TD639W control arm bushing kit
- Also called: suspension control arm bushing kit
- Fits: the 1987-1996 Dodge Dakota and other vehicles
- Position: Front upper
A clunk over bumps, a loose steering feel or cracked, torn bushings can mean the bushings are worn. These signs alone do not prove the bushings are the problem, since a worn ball joint can make a similar noise.
Fits
This kit fits the 1987-1996 Dodge Dakota, the 1998-2003 Dodge Durango and the 1977-1989 Dodge Diplomat, along with many other Dodge, Chrysler and Plymouth models. The 1998-2003 Dodge Durango, for example, takes two. If your car is not named here, look it up in the "Vehicles it fits" section on this page.
Specifications
- Position: Front upper
- Quantity per vehicle: 2
Interchange: 410 6195
3815702 · 4014061 · 4014095 · BB7084 · BB7084PR · K7084 · GK7084 · MK7084 · JBU930
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
3815702, 4014061, 4014095, 410 6195, BB7084, BB7084PR, K7084, GK7084, MK7084, JBU930
Frequently Asked Questions
Does the Delphi TD639W bushing kit fit a 1987-1996 Dodge Dakota?
Yes, Delphi TD639W fits the 1987-1996 Dodge Dakota, two per vehicle. Look for your own car in the "Vehicles it fits" section.
Is this suspension control arm bushing kit for the upper or lower arm?
This is a front upper control arm bushing kit. The catalog gives its position as front upper.
How is the Delphi TD639W bushing kit tested?
The parts withstand temperatures below -40 °C and over 120 °C and are exposed to 720 hours of salt spray.
What can worn front upper control arm bushings feel like?
A clunk over bumps or a loose steering feel can go with worn bushings, and visible cracks or tears are another sign. A shop can confirm the cause.
Are these control arm bushings made to cut noise?
Yes. Delphi manufactures these bushings to reduce noise and for consistent life, and they assist in restoring the smooth ride of the vehicle.
