Delphi TC1054 front right lower control arm for the 1996-2003 Mercedes-Benz E320 and other vehicles locates the front right wheel and lets it move with the suspension. The dimensional and material analysis behind this Delphi control arm is aimed at close compatibility with the OE part.
- Tested at temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on each control arm to check the material
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durable, smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC1054 control arm
- Also called: suspension control arm
- Fits: 1996-2003 Mercedes-Benz E320 and other vehicles
- Position: Front right lower
- Condition: New
A clunk over bumps or uneven front tire wear can mean a worn suspension control arm, though a loose neighboring suspension part can make a similar noise. With the engine off, look at the arm for cracks, bends or heavy rust to find the cause before replacing it. This listing is one arm for the front right; the left is ordered separately, the axle takes one per side, and both are normally replaced together.
Fits
The 1996-2003 Mercedes-Benz E320, the 1998-2002 Mercedes-Benz E430 and the 1999-2002 Mercedes-Benz E55 AMG are among the vehicles it fits. For any other car, look up its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
Build and materials
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection
- Condition: New
This part cross-references / interchanges with the following part numbers:
101-5882, 102-5882, 520588, CA28194, CA28324, CK620089, K620089, RK620089, 210 330 3507, 210 330 4507, 210 330 62 07, 210 330 77 07, 210 330 9107, A210 330 3507, A210 330 4507, A210 330 6207, A210 330 7707, A210 330 9107, CMS101025, MS101025, JTC995
Frequently Asked Questions
Is this the Mercedes E320 control arm for 1996-2003 models?
Yes. Delphi TC1054 is a front right lower control arm for the 1996-2003 Mercedes-Benz E320. The listing is for one arm.
Does Delphi TC1054 work as a Mercedes E430 control arm for 1998-2002 cars?
Yes. Delphi TC1054 is listed for the 1998-2002 Mercedes-Benz E430 as a front right lower control arm. Other vehicles are in the "Vehicles it fits" section.
How is this Delphi lower control arm tested?
Salt-spray exposure runs 720 hours, and the temperature range goes from below -40 degrees C to over 120 degrees C. Each arm also gets 100% crack and ultrasonic flaw detection.
Are the ball studs on this control arm machined to a set tolerance?
Yes. Delphi machines the ball studs on this control arm to micron tolerances, for durable and smooth joint operation.
What does robot welding do for this front right lower control arm?
Robot welding gives the arm's welds consistent performance and quality. Anti-corrosion protection is also applied to the arm.
