Delphi TC5572 front right lower control arm for the 2004-2006 Acura TL connects the wheel to the chassis and lets the suspension move. This Delphi control arm comes from an aftermarket steering line that applies OE expertise, with dimensional and material analysis behind its compatibility.
- Withstands temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on each control arm
- Robot-welded construction for consistent performance and quality
- Ball studs machined to micron tolerances for smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC5572 control arm
- Also called: suspension control arm
- Fits: 2004-2006 Acura TL
- Position: Front right lower
- Condition: New
A worn suspension control arm can show up as a clunk over bumps, uneven tire wear or steering that wanders. If the arm is the cause, this one replaces it. Before ordering, look the arm over with the engine off for cracks, bends or a damaged joint, since other worn suspension parts can give similar symptoms.
Fits
This lower control arm is a direct-fit replacement for the 2004-2006 Acura TL. Both front lower arms are normally replaced together, but this listing is one arm for the front right; the front left is a separate part, and the 2004-2006 Acura TL takes one arm per side.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1 for this side
Build and materials
- Condition: new
- Corrosion protection: anti-corrosion protection on each part
Interchange: 102-7932 · 622.40815 · 520-656 · 51350-SEP-A00
CA50054 · CA50054PR · CK641544 · RK641544 · CMS601022 · GS601022 · JTC2726
This part cross-references / interchanges with the following part numbers:
102-7932, 622.40815, 520-656, 51350-SEP-A00, CA50054, CA50054PR, CK641544, RK641544, CMS601022, GS601022, JTC2726
Frequently Asked Questions
Does this control arm fit a 2005 Acura TL?
Yes. Delphi TC5572 fits the 2005 Acura TL as part of the 2004-2006 range, in the front right lower position.
How does Delphi test the TC5572 control arm for heat, cold and salt?
Delphi TC5572 withstands temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
How are the ball studs on this front right lower control arm made?
Delphi machines the ball studs to micron tolerances. The aim is durability and smooth joint operation.
How does Delphi check this control arm for flaws?
Each arm undergoes 100% crack detection and ultrasonic flaw detection. The arm is also robot-welded for consistent quality.
Can I use Delphi TC5572 in place of number CK641544?
Yes. CK641544 is one of the other brands' numbers that Delphi TC5572 replaces, and this arm covers the front right lower position.
