Delphi Suspension Stabilizer Bar Link Kit P/N:TC1614
Delphi TC2515 front left sway bar link kit for the 2012-2014 BMW X1 and other vehicles connects the front left end of the sway bar to the suspension. It replaces a link whose joint has worn.
A knock or rattle over bumps, or a torn or loose joint at the link, can mean it has worn. Strut mounts, control arm bushings and tie rod ends can make similar noises, so pin down the source before you buy.
Listed for a wide range of BMW models, this kit is a direct-fit replacement for the 2009-2013 BMW 335i xDrive and the 2009-2012 BMW 328i xDrive, plus that same model in 2013 with the L6-3.0L engine. This listing is one kit for the front left, and each car takes one on that side; the front right is a separate part, and both sides are normally replaced together. If your BMW isn't named here, enter its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 101-6893 · 606.34028 · BW-L161 · 545-1846
3135 6768 771 · LS13039 · KSLF4284 · KSLF4571 · SL14051 · K750220 · SL953 · GS10857 · MS10857 · JTS1461
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Delphi TC2515 fit the 2012-2014 BMW X1?
Yes. Delphi TC2515 is listed for the 2012-2014 BMW X1, and the car takes one of these kits on the front left.
Is the Delphi TC2515 for the left or right side?
Delphi TC2515 is made for the front left. The front right side is a separate part.
How is the Delphi TC2515 stabilizer bar link kit tested?
The links are fatigue tested to avoid failure. They are also tested below -40 degrees C and above 120 degrees C and exposed to 720 hours of salt spray.
What sounds can a worn front sway bar link make?
A knock or rattle over bumps can mean the link has worn. A torn or visibly loose joint at the link is another sign.
How are these sway bar links built to resist rust and weld breakage?
Anti-corrosion protection is applied to each part. Ultrasonic molding is used to help prevent future weld breakage.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.