Delphi Suspension Stabilizer Bar Link Kit TC8477
Delphi Suspension Stabilizer Bar Link Kit TC8477

Delphi Suspension Stabilizer Bar Link Kit P/N:TC8477

Be the first to review this product
$20.99
MPN: TC8477
UPC: 689604392072
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Ask an Expert
Delphi Suspension Stabilizer Bar Link Kit P/N:TC8477
Delphi Suspension Stabilizer Bar Link Kit P/N:TC8477
$20.99

Quiet a clunking front end and help keep body lean in check with the Delphi Suspension Stabilizer Bar Link Kit TC8477. This front sway bar link connects the stabilizer bar to the suspension on the 1997-2004 Mitsubishi Montero Sport, transmitting cornering loads so the anti-roll bar can do its job. If worn, loose, or noisy links are behind the rattle or knock over bumps, this Delphi sway bar link kit is a direct-fit replacement.

  • OE-derived testing: validated below -40°C and above 120°C and through 720 hours of salt spray, with dimensional and material analysis for close compatibility between the OE and aftermarket part.
  • Fatigue tested: Delphi sway bar links are fatigue tested to guard against failure.
  • Ultrasonic molding: built with ultrasonic molding to help prevent future weld breakage.
  • Precision & protection: machined to micron tolerances for smooth joint operation, with anti-corrosion protection applied to each part.

Sway bar links wear on both sides, so replacing the pair together is good practice for balanced handling.

Interchange: SL68085 · MS80863 · MR151937 · MR267643

This part cross-references / interchanges with the following part numbers:

SL68085, MS80863, MR151937, MR267643

Frequently Asked Questions

What vehicle does the Delphi TC8477 fit?

It is a direct-fit front sway bar link kit for the 1997-2004 Mitsubishi Montero Sport. See the Buyer's Guide tab to confirm your exact vehicle.

Is this a front or rear stabilizer bar link kit?

This is a FRONT sway bar link kit, connecting the front stabilizer (anti-roll) bar to the suspension.

What does a sway bar link do?

It connects the stabilizer bar to the suspension, transmitting cornering loads so the anti-roll bar can limit body lean during turns.

What are the signs my sway bar links may need replacing?

Clunking, knocking, or rattling from the front when driving over bumps or through corners can be a sign of worn links. Diagnose the cause before replacing.

Should I replace both links at once?

Sway bar links wear on both sides, so replacing them as a pair is recommended for balanced handling, though they can be serviced individually.

Related Products

!