Delphi TC6993 rear sway bar link for the 2019-2025 BMW X4 and other vehicles connects the sway bar to the rear suspension, so the bar can work against body roll in turns. Delphi's dimensional and material analysis makes it compatible with the original part.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C
- Exposed to 720 hours of salt spray in testing
- Ultrasonic molding helps prevent future weld breakage
- Fatigue tested to avoid failure
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
A clunk or rattle from the rear over bumps, more body lean in corners or a loose feel at the back of the car can mean a sway bar link is worn. Before you replace it, rule out worn sway bar bushings, shocks or other rear suspension parts, since they can make similar noises.
It is a direct-fit replacement for the 2019-2025 BMW X4 and the 2018-2024 BMW X3. This listing is one link for one side of the rear axle, and the link on the other side is normally replaced at the same time.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
Build and materials
- Manufacturing: ultrasonic molding
- Corrosion protection: anti-corrosion protection on each part
In the box
One rear sway bar link. Both of these BMW models take two on the rear axle.
Interchange: 33 55 6 870 702 · 541-837
KSLR4125 · MS108281 · X05SL0573
This part cross-references / interchanges with the following part numbers:
33 55 6 870 702, 541-837, KSLR4125, MS108281, X05SL0573
Frequently Asked Questions
Does the Delphi TC6993 fit the rear of the 2018-2024 BMW X3?
Yes. Delphi TC6993 is a rear sway bar link for the 2018-2024 BMW X3, and it also fits the 2019-2025 BMW X4.
Why is this stabilizer bar link made with ultrasonic molding?
Ultrasonic molding is used on this rear sway bar link to help prevent future weld breakage, and the link is fatigue tested to avoid failure.
How much salt spray testing does this Delphi link go through?
This rear sway bar link is exposed to 720 hours of salt spray, and anti-corrosion protection is applied to each part.
What can a worn rear sway bar link feel or sound like?
A worn rear sway bar link can show up as a knock or rattle over rough pavement, extra body lean when cornering, or a loose feel from the back of the car.
What temperatures is the Delphi TC6993 sway bar link tested for?
Delphi TC6993 is tested to withstand temperatures below -40 degrees C and over 120 degrees C, and it is machined to micron tolerances for smooth joint operation.
