Delphi TC6998 sway bar link for the 2021-2025 BMW 230i and other vehicles ties the sway bar to the suspension on the front left side. It is made with ultrasonic molding to help prevent future weld breakage.
- Ultrasonic molding helps prevent future weld breakage.
- Fatigue tested to avoid failure.
- Machined to micron tolerances for durability and smooth joint operation.
- Tested below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray.
- Anti-corrosion protection is applied to each part.
A worn link can show up as a clunk or rattle over bumps, a looser feel in corners, or play in the joint. Worn sway bar bushings, strut mounts or control arm joints can be behind these signs too, so find the cause before buying. Each vehicle takes one front left link, and the links on both sides are normally replaced together, so plan on a second one for the right side.
It is listed for a wide range of BMW models, including the 2023-2025 BMW 230i xDrive and the 2019-2025 BMW 330i. If your car isn't named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: front left
- Quantity per vehicle: 1
Build and materials
- Construction: ultrasonic molding
- Corrosion protection: anti-corrosion protection on each part
- Country of origin: Turkey
Interchange: 31 30 6 893 359
KSLF4231 · MS108307 · X05SL0532
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
31 30 6 893 359, KSLF4231, MS108307, X05SL0532
Frequently Asked Questions
Does the Delphi TC6998 fit the 2023-2025 BMW 230i xDrive?
Yes, Delphi TC6998 is listed for the 2023-2025 BMW 230i xDrive and the 2019-2025 BMW 330i. For any other BMW, look up your car in the "Vehicles it fits" section.
Is the Delphi TC6998 a left or right link?
Delphi TC6998 is the front left link, and each vehicle takes one for that position. It is sold individually, so the right side needs its own link.
How is this Delphi sway bar link protected against rust?
Anti-corrosion protection is applied to each part. The link was also exposed to 720 hours of salt spray in testing.
How does Delphi make this stabilizer bar link?
It is made with ultrasonic molding to help prevent future weld breakage, and machined to micron tolerances. It is also fatigue tested to avoid failure.
Does Delphi TC6998 replace number 31 30 6 893 359?
Yes, 31 30 6 893 359 is one of the numbers Delphi TC6998 replaces, along with KSLF4231, MS108307 and X05SL0532.
