DENSO Auto Parts Oxygen Sensor P/N:234-4642
DENSO Auto Parts 234-3011 oxygen sensor for the 1995 Chevrolet C1500 V6 4.3L, V8 5.0L or 5.7L and other vehicles measures the oxygen in the exhaust so the engine computer can control the air-fuel ratio. This upstream sensor is manufactured and tested to the strictest OE standards.
A failing upstream oxygen sensor can bring on a check engine light, higher fuel use or a rough idle. Wiring faults can set similar codes, so first look over the harness and connector with the engine off and cool for melted insulation or a loose plug. A shop can test the sensor's output. This listing is one sensor: the 1995 Chevrolet C1500 V6 4.3L takes two upstream sensors, and its V8 5.0L or 5.7L takes one.
It is a direct-fit replacement for a wide range of Chevrolet, GMC, Buick, Oldsmobile and Pontiac vehicles, including the 1995 Chevrolet K1500 V6 4.3L, V8 5.0L or 5.7L and the 1995 Chevrolet Tahoe V8 5.7L. If your vehicle isn't named here, find it in the "Vehicles it fits" section.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right oxygen sensor for a 1995 Chevy Tahoe V8 5.7L?
Yes. The DENSO Auto Parts 234-3011 upstream oxygen sensor fits the 1995 Chevrolet Tahoe V8 5.7L, which takes one.
Does the DENSO 234-3011 fit a 1995 Chevrolet K1500 with the V8 5.0L?
Yes. The DENSO Auto Parts 234-3011 fits the 1995 Chevrolet K1500 V6 4.3L, V8 5.0L or 5.7L. If your vehicle is not one of these, look it up in the "Vehicles it fits" section.
Does this heated oxygen sensor mount upstream or downstream?
Upstream. This oxygen sensor is a heated, narrow-band, 3-wire type made for the upstream position.
What thread size and harness length does this 3-wire sensor have?
This oxygen sensor has a 0.708 in thread diameter for a threaded mount and a 13.98 in wiring harness that ends in a female connector.
What does the aluminum oxide trap layer on this DENSO sensor do?
The aluminum oxide trap layer on the DENSO Auto Parts 234-3011 oxygen sensor is designed to protect the ceramic element from silicone and lead poisoning.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.