DENSO Auto Parts Oxygen Sensor P/N:234-3088
DENSO Auto Parts 234-4104 oxygen sensor for the 2004-2005 Chevrolet Malibu 4-cylinder 2.2L and other vehicles senses oxygen in the exhaust and reports it to the engine computer. This direct-fit DENSO Auto Parts oxygen sensor is a heated, narrow-band unit.
A failing oxygen sensor can show up as a check engine light, poorer fuel economy or rough running. Before you replace it, rule out an exhaust leak, a damaged wire or connector, and other faults that can light the same warning; a shop can scan the codes to narrow it down.
As a downstream sensor, it also fits the 2004-2005 Chevrolet Classic 4-cylinder 2.2L and the 2002-2005 Pontiac Grand Am 4-cylinder 2.2L. This listing is one sensor, and the 2004-2005 Chevrolet Malibu 4-cylinder 2.2L takes one. For any other model or engine, open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Chevy Malibu oxygen sensor for the 2004-2005 Malibu 4-cylinder 2.2L?
Yes. DENSO Auto Parts 234-4104 is a downstream sensor for the 2004-2005 Chevrolet Malibu 4-cylinder 2.2L. Open the "Vehicles it fits" section to check other models and engines.
Is this DENSO oxygen sensor a Pontiac Grand Am oxygen sensor for the 2002-2005 Grand Am 4-cylinder 2.2L?
Yes. The 2002-2005 Pontiac Grand Am 4-cylinder 2.2L takes one DENSO 234-4104 downstream sensor, and this listing is a single sensor.
How many wires and what thread size does this downstream oxygen sensor have?
It has 4 wires with a female connector, a 0.708 in thread diameter and a 42.52 in wiring harness length. It is heated, narrow-band and threaded.
What signs can a failing downstream oxygen sensor show?
A check engine light, poorer fuel economy or rough running. Each of these can have other causes, and a shop can read the codes to find out.
What does the aluminum oxide trap layer on this DENSO oxygen sensor do?
It is designed to protect the ceramic element from silicone and lead poisoning. The housing is laser-welded stainless, and a PTFE filter blocks contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.