DENSO Auto Parts Oxygen Sensor P/N:234-4642
DENSO Auto Parts 234-4145 oxygen sensor for the 1996 Mazda Miata 4-cylinder 1.8L senses oxygen in the exhaust and reports it to the engine computer. It is a heated, narrow-band sensor with four wires and a threaded mount.
A lit check engine light, lower fuel economy or a rough idle can mean an oxygen sensor is wearing out. These signs alone do not prove the sensor is the problem, since an exhaust leak can skew the reading too.
This is a direct-fit sensor for the 1996 Mazda Miata 4-cylinder 1.8L, which takes one in the downstream position. The listing is one sensor.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the DENSO 234-4145 fit the 1996 Mazda Miata 4-cylinder 1.8L?
Yes. The DENSO 234-4145 is a direct-fit downstream oxygen sensor for the 1996 Mazda Miata 4-cylinder 1.8L, and that car takes one.
Is this a downstream oxygen sensor?
Yes. This sensor is for the downstream position, and the application takes one.
What thread size and wire length does this oxygen sensor have?
The thread diameter is 0.708 in and the wiring harness is 19.69 in long. It has four wires and a male connector.
What is the aluminum oxide trap layer in this sensor for?
The aluminum oxide trap layer is designed to protect the ceramic element from silicone and lead poisoning.
Is this DENSO Auto Parts oxygen sensor made to OE standards?
Yes. DENSO oxygen sensors, including the 234-4145, are manufactured and tested to the strictest OE standards.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.