DENSO Auto Parts Oxygen Sensor P/N:234-4199
DENSO Auto Parts 234-4255 oxygen sensor for the 2008-2009 Chevrolet Equinox V6 3.4L and other vehicles senses oxygen in the exhaust for the engine computer. This DENSO Auto Parts oxygen sensor is a downstream, heated, narrow-band unit made and tested to OE standards.
A failing oxygen sensor can show up as a check engine light, poorer fuel economy or a rough idle. These signs alone do not prove the sensor is the problem; an exhaust leak is another common cause.
The 2008-2010 Chevrolet Malibu V6 3.5L takes this direct-fit sensor, and so do many other vehicles. As a Pontiac G6 oxygen sensor, it covers the 2008-2009 V6 3.9L and the 2008-2010 V6 3.5L. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One oxygen sensor. This listing holds one sensor; the 2008-2009 Chevrolet Equinox V6 3.4L takes one, and the 2008-2010 Chevrolet Malibu V6 3.5L takes two.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Chevy Equinox oxygen sensor replacement for the 2008-2009 Chevrolet Equinox V6 3.4L?
Yes, DENSO Auto Parts 234-4255 is a direct-fit downstream oxygen sensor for the 2008-2009 Chevrolet Equinox V6 3.4L, which takes one. Open the "Vehicles it fits" section to check other vehicles.
Does this Chevy Malibu oxygen sensor fit the 2008-2010 Chevrolet Malibu V6 3.5L?
Yes. This downstream sensor fits the 2008-2010 Chevrolet Malibu V6 3.5L, and that engine takes two of them.
What thread size and wire length does the DENSO 234-4255 oxygen sensor have?
DENSO Auto Parts 234-4255 has a 0.708 in thread diameter and a 14.76 in wiring harness, with four wires and a female connector.
How can I tell if a downstream oxygen sensor is going bad?
A check engine light, worse fuel economy or a rough idle can mean the sensor is wearing out. A shop can read the stored codes and test it.
Is this oxygen sensor heated, and does it have a filter?
Yes. This oxygen sensor is heated and narrow-band, with a laser-welded stainless housing and a PTFE filter that blocks contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.