DENSO Auto Parts Oxygen Sensor P/N:234-4850
DENSO Auto Parts 234-4293 oxygen sensor for the 2006-2009 Suzuki Swift+ 4-cylinder 1.6L and other vehicles measures the oxygen in the exhaust and reports it to the engine computer. It is a direct-fit upstream sensor with a heated element.
A check engine light, a rougher idle or poorer fuel economy can mean an oxygen sensor is worn. Before you replace this one, rule out a damaged wire or connector, an exhaust leak ahead of the sensor and other engine faults that could set the same code. A shop can test it with a scan tool.
The vehicles it fits include the 2006-2008 Chevrolet Aveo 4-cylinder 1.6L and the 2006-2008 Chevrolet Aveo5 4-cylinder 1.6L. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine. This listing is one sensor, and the 1.6L in these cars calls for a single upstream sensor.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this one of the Aveo oxygen sensors that fits a 2006-2008 Chevrolet Aveo 4-cylinder 1.6L?
Yes, DENSO Auto Parts 234-4293 is listed for the 2006-2008 Chevrolet Aveo 4-cylinder 1.6L as an upstream sensor. Open the "Vehicles it fits" section to check other models.
Is this oxygen sensor right for the 2006-2009 Suzuki Swift+ 4-cylinder 1.6L?
Yes. The 234-4293 sensor is listed for the 2006-2009 Suzuki Swift+ 4-cylinder 1.6L, and that engine takes one upstream sensor.
What thread size and wire length does the DENSO 234-4293 sensor have?
DENSO Auto Parts 234-4293 has a threaded mount with a 0.708 in thread diameter. Its harness is 15.75 in long with 4 wires and a male connector.
How can I tell if an upstream oxygen sensor is going bad?
A check engine light, a rougher idle or poorer fuel economy can be signs of a worn sensor. A shop can test the sensor's readings with a scan tool.
What does the aluminum oxide trap layer in this DENSO sensor do?
The aluminum oxide trap layer is designed to protect the ceramic element from silicone and lead poisoning. The sensor also has a PTFE filter that blocks contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.