DENSO Auto Parts Oxygen Sensor P/N:234-4156
DENSO Auto Parts 234-4388 oxygen sensor for the 2007 Suzuki SX4 4-cylinder 2.0L measures the oxygen left in the exhaust downstream of the catalyst. It is a heated, narrow-band sensor that sends its reading to the engine computer.
A lit check engine light, lower fuel economy or a rough idle can mean the sensor has worn out. An exhaust leak, a vacuum leak or a tired catalytic converter can be behind those signs too, so track down the cause before you buy a new sensor.
This direct-fit sensor fits the 2007 Suzuki SX4 4-cylinder 2.0L. The listing is one downstream sensor, and the car takes one in that position.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this DENSO oxygen sensor the right one for a 2007 Suzuki SX4 4-cylinder 2.0L?
Yes. DENSO Auto Parts 234-4388 is a downstream, direct-fit oxygen sensor for the 2007 Suzuki SX4 4-cylinder 2.0L, and that car takes one.
How long is the wiring harness on the DENSO 234-4388, and what thread does it have?
DENSO 234-4388 has a 17.32 in wiring harness, a male connector and a threaded mount. The thread diameter is 0.708 in.
What does the aluminum oxide trap layer in this oxygen sensor do?
It is designed to protect the ceramic element from silicone and lead poisoning. A PTFE filter also blocks contaminants, and a dual-layer shield protects the element.
Is this downstream oxygen sensor heated, and how many wires does it have?
Yes. This sensor is a heated, narrow-band type with four wires.
Where is this DENSO oxygen sensor made?
The country of origin for this DENSO sensor is Japan.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.