DENSO Auto Parts Oxygen Sensor P/N:234-4773
DENSO Auto Parts 234-4434 left oxygen sensor for the 1999-2005 Hyundai Sonata 4-cylinder 2.4L and other vehicles measures oxygen in the exhaust gas. The DENSO Auto Parts oxygen sensor is a heated narrow-band unit with a threaded mount, built and tested to OE standards.
A worn oxygen sensor can show up as a check engine light, a rough idle or poorer fuel economy. A vacuum leak, an exhaust leak, worn spark plugs or a fuel-delivery fault may be behind those signs too, so find the actual cause before you buy a sensor.
It is listed for a wide range of Hyundai and Kia models, including a direct-fit oxygen sensor replacement for the 1999-2005 Hyundai Sonata 4-cylinder 2.4L, the 2001-2006 Kia Optima 4-cylinder 2.4L and the 2001-2006 Hyundai Santa Fe 4-cylinder 2.4L. Owners of other models can look up their year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
This listing is one oxygen sensor; the 1999-2005 Hyundai Sonata 4-cylinder 2.4L takes one.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this O2 sensor right for the 1999-2005 Hyundai Sonata 4-cylinder 2.4L?
Yes. DENSO Auto Parts 234-4434 is listed for the 1999-2005 Hyundai Sonata 4-cylinder 2.4L, which takes one sensor. For another model, look it up in the "Vehicles it fits" section.
How long is the wiring harness on the DENSO 234-4434?
The wiring harness on DENSO Auto Parts 234-4434 is 23.62 in long and ends in a four-wire male connector.
Is the DENSO 234-4434 a wideband or narrow-band sensor?
The DENSO 234-4434 is a heated narrow-band sensor with four wires and a threaded mount. Its thread diameter is 0.708 in.
What signs can point to a worn heated narrow-band oxygen sensor like the DENSO 234-4434?
A check engine light, a rough idle or lower fuel economy can be signs. A shop can scan for codes and test the sensor; at home you can look the wiring over for damage with the engine off and cool.
What does the aluminum oxide trap layer do in this oxygen sensor?
The aluminum oxide trap layer in this DENSO sensor is designed to protect the ceramic element from silicone and lead poisoning. The housing is laser-welded stainless, and a PTFE filter blocks contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.