DENSO Auto Parts Oxygen Sensor P/N:234-8084
DENSO Auto Parts 234-4526 oxygen sensor for the 2013-2014 Chevrolet Malibu 4-cylinder 2.4L and other vehicles reads the oxygen in the exhaust after the catalytic converter. Each unit is made and tested to OE standards for an exact, first-time fit.
A worn oxygen sensor can show up as a check engine light, a failed emissions test or lower fuel economy, though other faults produce those signs too. Before replacing it, look over the wire and connector with the engine off and cool for cuts, melted insulation or loose pins. If a failed sensor is the cause, this one replaces it.
The 2013-2014 Chevrolet Malibu 4-cylinder 2.4L and the 2014 Chevrolet Impala 4-cylinder 2.4L take this downstream sensor, as do many other vehicles. It also works as a Buick LaCrosse oxygen sensor for the 2011-2016 model with the 4-cylinder 2.4L. Each takes one, and this listing is a single sensor. Driving something else? Look up your own year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Chevy Malibu oxygen sensor for a 2013-2014 car with the 4-cylinder 2.4L?
Yes. DENSO 234-4526 is a downstream oxygen sensor listed for the 2013-2014 Chevrolet Malibu 4-cylinder 2.4L, and that car takes one.
Is this the right Chevy Impala oxygen sensor for a 2014 car with the 4-cylinder 2.4L?
Yes. This downstream sensor is listed for the 2014 Chevrolet Impala 4-cylinder 2.4L, and that car takes one.
Is the DENSO Auto Parts oxygen sensor heated, and how many wires does it have?
Yes. DENSO 234-4526 is a heated, narrow-band sensor with 4 wires and a male connector. The wiring harness is 16.38 in long.
What thread size does this downstream oxygen sensor have?
The thread diameter is 0.708 in, and the sensor mounts by threading in. The wiring harness measures 16.38 in.
What protects the ceramic element inside this oxygen sensor from contamination?
A PTFE filter blocks contaminants, and the aluminum oxide trap layer is designed to protect the ceramic element from silicone and lead poisoning.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.