DENSO Auto Parts Oxygen Sensor P/N:234-4044
DENSO Auto Parts 234-4565 oxygen sensor for the 2012-2016 GMC Acadia V6 3.6L and other vehicles reads the oxygen content of the exhaust and reports it to the engine computer. The engine computer uses that reading to help keep the air-fuel ratio in range.
A worn oxygen sensor can show up as a check engine light, a rough idle or poorer fuel economy, since other problems can trigger those signs too. With the engine off and cool, a good first check is a look at the wiring harness and connector for cracks, melted insulation or oil contamination. A shop can read the codes and test the sensor itself.
Listed as an oxygen sensor for the 2012-2017 Buick Enclave V6 3.6L and the 2012-2017 Chevrolet Traverse V6 3.6L, this direct-fit part also covers a wide range of other Buick, Cadillac, Chevrolet and GMC models. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Fit and size
Build and materials
One oxygen sensor with its wiring harness. This listing is one sensor; the 2012-2016 GMC Acadia V6 3.6L takes two, and the quantity changes with the application.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right GMC Acadia oxygen sensor for a 2012-2016 V6 3.6L?
Yes. DENSO Auto Parts 234-4565 is listed for the 2012-2016 GMC Acadia V6 3.6L, which takes two. Open the "Vehicles it fits" section for other models.
Will this work as a Chevy Traverse oxygen sensor on a 2012-2017 V6 3.6L?
Yes. This sensor is listed for the 2012-2017 Chevrolet Traverse V6 3.6L, and that engine takes two.
What thread size and connector does the DENSO Auto Parts 234-4565 oxygen sensor have?
DENSO Auto Parts 234-4565 has a threaded mount with a 0.708 in thread diameter. It has four wires and a female connector on a 10.24 in wiring harness.
What signs can a worn heated narrow-band oxygen sensor show?
A check engine light, a rough idle or worse fuel economy can be signs of a worn sensor, though other problems can trigger them too. A shop can scan the codes and test it.
What does the aluminum oxide trap layer in this DENSO sensor do?
The aluminum oxide trap layer protects the ceramic element from silicone and lead poisoning. A PTFE filter also blocks contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.