DENSO Auto Parts Oxygen Sensor P/N:234-4080
DENSO Auto Parts 234-4727 oxygen sensor for the 2000-2002 Honda Accord V6 3.0L and other vehicles measures exhaust oxygen and reports it to the engine computer. This DENSO Auto Parts oxygen sensor is built and tested to the strictest OE standards, and each component is made for exact replacement.
A worn oxygen sensor can show up as a check engine light, a rough idle or lower fuel economy. An exhaust leak, a vacuum leak, a misfiring spark plug or a fuel injector problem can be behind those signs too, so trace the problem first and then buy the sensor.
The 2000-2002 Honda Accord V6 3.0L, the 2001-2004 Honda Odyssey V6 3.5L and the 2001-2003 Acura CL V6 3.2L are direct fits for this sensor, along with more vehicles. To find your own car's year and engine, look in the "Vehicles it fits" section on this page. This listing is one sensor, and the O2 sensor position on the 2000-2002 Honda Accord V6 3.0L takes one.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right oxygen sensor for a 2000-2002 Honda Accord V6 3.0L?
Yes. DENSO Auto Parts 234-4727 is an upstream sensor for the 2000-2002 Honda Accord V6 3.0L, which takes one. For other years or engines, look in the "Vehicles it fits" section.
Does this O2 sensor fit a 2002 Honda Accord V6 3.0L?
Yes. The 2002 model year falls inside the 2000-2002 Honda Accord V6 3.0L fitment for DENSO Auto Parts 234-4727, an upstream sensor.
How long is the wire on this DENSO 4-wire oxygen sensor?
The wiring harness is 17.32 inches long and has four wires with a male connector. The sensor mounts by thread, and the thread diameter is 0.708 inch.
What signs can point to a worn upstream oxygen sensor?
A check engine light, a rough idle or a drop in fuel economy can be signs of a worn sensor. A shop can test the sensor to confirm.
What does the aluminum oxide trap layer in this DENSO oxygen sensor do?
The aluminum oxide trap layer is designed to protect the ceramic element from silicone and lead poisoning. A PTFE filter blocks contaminants, and the housing is laser-welded stainless.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.