DENSO Auto Parts Oxygen Sensor P/N:234-8084
DENSO 234-4971 oxygen sensor for the 2014-2019 Mini Cooper 3-cylinder 1.5L or 4-cylinder 2.0L and other vehicles measures oxygen in the exhaust and sends the reading to the engine computer. It is a heated, narrow-band, four-wire sensor in a direct-fit design for the downstream position.
A failing oxygen sensor can show up as a check engine light, rough running or poorer fuel economy, but those signs have more than one possible source. Before replacing it, look over the wiring harness and connector with the engine off and cool for cracked, melted or chafed insulation. Each vehicle takes one downstream sensor.
This direct-fit downstream oxygen sensor suits the 2017-2019 Mini Cooper Countryman 4-cylinder 2.0L, the 2017-2024 Cooper Countryman 3-cylinder 1.5L and the 2016-2020 BMW X1 4-cylinder 2.0L, along with the 2014-2019 Mini Cooper 3-cylinder 1.5L or 4-cylinder 2.0L and many other models. Driving something else? Look up your own car in the "Vehicles it fits" section.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this an oxygen sensor for the 2014-2019 Mini Cooper 3-cylinder 1.5L or 4-cylinder 2.0L?
Yes. DENSO 234-4971 is a downstream oxygen sensor for the 2014-2019 Mini Cooper with either the 3-cylinder 1.5L or the 4-cylinder 2.0L. The "Vehicles it fits" section covers other cars.
Is this a downstream sensor for the 2016-2020 BMW X1 4-cylinder 2.0L?
Yes. DENSO 234-4971 fits the 2016-2020 BMW X1 4-cylinder 2.0L as a downstream oxygen sensor, and the car takes one.
What thread size and wire length does this oxygen sensor have?
This downstream oxygen sensor has a 0.708 in thread diameter and a 24.25 in wiring harness. It uses four wires and a male connector.
Is this DENSO oxygen sensor upstream or downstream?
Downstream. It is a heated, narrow-band sensor with four wires and a threaded mount.
What protects the sensing element in this oxygen sensor?
A PTFE filter blocks contaminants, and dual-layer protection shields the ceramic element. An aluminum oxide trap layer also guards it from silicone and lead poisoning.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.