DENSO Auto Parts Oxygen Sensor P/N:234-4951
DENSO Auto Parts 234-8052 right oxygen sensor for the 2016-2020 Chevrolet Tahoe V8 5.3L, the 2018-2020 Tahoe V8 6.2L and other vehicles measures the oxygen left in the exhaust so the engine computer can adjust fuel delivery. This DENSO Auto Parts oxygen sensor is a narrow-band type with a threaded mount.
A check engine light, rough running or poor fuel economy can mean an oxygen sensor is worn. Before you replace this one, rule out wiring damage or an exhaust leak near the sensor, since either can set a similar code. A shop can read the codes and test the sensor.
Listed for a wide range of Chevrolet, GMC and Cadillac models, it is an oxygen sensor for the 2016-2020 GMC Yukon V8 5.3L or 6.2L and for the 2016-2020 Chevrolet Suburban V8 5.3L and the 2019-2020 Suburban V8 6.2L. If your truck is not named here, find it in the "Vehicles it fits" section.
Fit and size
Build and materials
One oxygen sensor for the upstream right position. This listing is one sensor and that position takes one; the other side is ordered separately.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the Chevy Tahoe oxygen sensor for the 2016-2020 V8 5.3L and the 2018-2020 V8 6.2L?
Yes. DENSO Auto Parts 234-8052 is listed for the 2016-2020 Chevrolet Tahoe V8 5.3L and the 2018-2020 Tahoe V8 6.2L. It is the upstream right sensor.
Does this listing work as a Chevy Suburban oxygen sensor for the 2016-2020 V8 5.3L or the 2019-2020 V8 6.2L?
Yes. The 234-8052 is listed for the 2016-2020 Chevrolet Suburban V8 5.3L and the 2019-2020 Suburban V8 6.2L, in the upstream right position.
What thread size and connector does the DENSO 234-8052 use?
The thread diameter is 0.709 in with a threaded mount. It is a narrow-band sensor with a male connector.
What protects the ceramic element inside this DENSO oxygen sensor?
An aluminum oxide trap layer is designed to shield the ceramic element from silicone and lead poisoning. A dual-layer shield and a PTFE filter also keep contaminants out.
How can I tell if an upstream oxygen sensor is wearing out?
A check engine light, rough running or lower fuel economy can go along with a worn sensor, though other faults cause them too. A shop can read the codes and test it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.