DENSO Auto Parts Oxygen Sensor P/N:234-8084
DENSO 234-8080 oxygen sensor for the 2013-2015 Chevrolet Malibu 4-cylinder 2.0L or 2.5L and other vehicles senses oxygen in the exhaust. The engine computer uses that reading to adjust the air-fuel ratio.
A failing oxygen sensor can show up as a check engine light, poor fuel economy or a rough idle, though other faults can set off those warnings too. So find the cause before you replace anything: look over the wiring and connector for damage with the engine off and cool, and leave live testing to a shop. If the sensor is the cause, this one replaces it.
A wide range of Chevrolet, GMC, Buick and Cadillac models take this oxygen sensor, including the 2013-2015 Chevrolet Malibu 4-cylinder 2.0L or 2.5L, the 2017-2021 GMC Acadia 4-cylinder 2.5L and the 2014-2019 Chevy Impala 4-cylinder 2.5L. Driving something else? Open the "Vehicles it fits" section and match your exact model and engine there. This listing is one sensor, and each car named here takes one upstream sensor; the quantity differs on some other applications.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Chevy Malibu oxygen sensor work on the 2013-2015 Chevrolet Malibu 4-cylinder 2.0L or 2.5L?
Yes. DENSO 234-8080 fits the 2013-2015 Chevrolet Malibu 4-cylinder 2.0L or 2.5L as an upstream sensor. For a different car, open the "Vehicles it fits" section.
Does the GMC Acadia oxygen sensor 234-8080 fit the 2017-2021 GMC Acadia 4-cylinder 2.5L?
Yes. DENSO 234-8080 is listed for the 2017-2021 GMC Acadia 4-cylinder 2.5L, which takes one sensor in the upstream position.
How many wires does this oxygen sensor have, and is it heated?
It has 4 wires and is a heated, narrow-band sensor with a male connector and a 15.04 in wiring harness.
What does the aluminum oxide trap layer in this oxygen sensor do?
It is designed to protect the ceramic element from silicone and lead poisoning. A PTFE filter also blocks contaminants, and the housing is laser-welded stainless.
What can a failing upstream oxygen sensor look like?
Signs can include a check engine light, poorer fuel economy or a rough idle. A shop can test the sensor with the engine running to confirm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.