Spark Plug Wire Set for 1984-1988 Toyota 4Runner & More - DENSO 671-4003

$33.99

Vehicles this part fits

    Part number: 671-4003
    UPC: 042511083561
    Condition: New
    Weight: 1.15 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $33.99
    Adding to cart… The item has been added

    Have questions?

    DENSO Auto Parts Spark Plug Wire Set P/N:671-4003
    DENSO Auto Parts Spark Plug Wire Set P/N:671-4003
    $33.99
    $33.99

    DENSO Auto Parts 671-4003 spark plug wire set for the 1984-1988 Toyota 4Runner 4-cylinder 2.4L and other vehicles carries ignition voltage to the spark plugs.

    • Kevlar®-reinforced core for strength
    • EMI/RFI suppression layers in the wire construction
    • Class E silicone jacket for heat resistance
    • Part of the DENSO First Time Fit ignition wire set line
    • Four 180-degree silicone spark plug boots

    Quick facts

    • Part: DENSO Auto Parts 671-4003 spark plug wire set
    • Fits: 1984-1988 Toyota 4Runner 4-cylinder 2.4L and other vehicles
    • Material: Silicone (spark plug boots)

    Misfires, hard starting or rough running can mean the wires are worn, though the spark plugs or the coil can be behind them too, so find the cause before replacing the set.

    Fits

    This wire set is listed for a wide range of Toyota and Saab models, among them the 1979-1980 Toyota Pickup 4-cylinder 2.2L and the 1981-1988 Pickup 4-cylinder 2.4L, and the 1979-1980 Toyota Celica 4-cylinder 2.2L and the 1981-1985 Celica 4-cylinder 2.4L. If your car is not named here, look it up in the "Vehicles it fits" section. The set is identical in form, fit, color and performance to the factory-installed wire sets, and every part of its construction meets or exceeds OE/OES standards.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Insulation outside diameter: 7.00 mm
    • Spark plug end boots: 4, 180 degrees

    Build and materials

    • Core: Kevlar®-reinforced
    • Jacket: Class E silicone
    • Spark plug boot material: silicone
    • Spark plug end terminal: female
    • Distributor coil end terminal: male
    • Country of origin: Mexico

    In the box

    One spark plug wire set. This listing is one set, and each vehicle takes one.

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    474M, 914B, 914E, 2X1658, 96411, 96894, 175-4407, 175-5805, 700168, 700293, CH445, 09098, 35-4003, 6441, 9485, 11-425M, MSW2189, 6714003, TX89, TX99A, TZ37, 104003, 229, QW742

    Frequently Asked Questions

    Is this the right spark plug wire for the 1984-1988 Toyota 4Runner 4-cylinder 2.4L?

    Yes. DENSO Auto Parts 671-4003 is listed for the 1984-1988 Toyota 4Runner 4-cylinder 2.4L, and that vehicle takes one set.

    Is this a spark plug wire set for the 1979-1980 Toyota Celica 4-cylinder 2.2L and the 1981-1985 Celica 4-cylinder 2.4L?

    Yes. This wire set is listed for the 1979-1980 Toyota Celica 4-cylinder 2.2L and for the 1981-1985 Celica 4-cylinder 2.4L, with one set per vehicle.

    What boot and terminal types does the DENSO 671-4003 wire set have?

    DENSO 671-4003 has four 180-degree silicone boots at the spark plug end with female terminals, and male terminals at the distributor coil end.

    What should I look for on the silicone jacket and boots of a worn spark plug wire set?

    With the engine off and cool, look for cracks, burn marks or brittle spots on the jacket and boots. While driving, misfires and hard starting are the signs you may notice.

    Does the DENSO 671-4003 wire set match the factory-installed wires?

    Yes. This DENSO First Time Fit set matches the factory-installed wire sets in form, fit, color and performance.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review