Wagner Brake ZD714 rear brake pad for the 2000-2005 Buick LeSabre and other vehicles is a ceramic pad designed and tested to restore like-new braking performance.
- Part of the Wagner QuickStop line
- Wagner OE25 zero-copper friction formulation
- OE fit and form design plus a 100% post-cure process for even friction performance through the life of the pad
- Application-specific design that reduces noise-causing vibration
- Application-specific materials, formulated for the needs of each vehicle application
Squealing or grinding from the rear when you brake, longer stopping distances or a pull to one side can mean the pads are worn. Before you replace them, rule out a sticking caliper or a worn rotor, since either can give similar noise or pulling. Each vehicle takes one set at the rear axle.
Rear brake pads for the 1997-2005 Buick Park Avenue and the 1994-2005 Cadillac DeVille are covered by this same number, along with many other vehicles.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1 set
Build and materials
- Friction material: Ceramic
- Slotted, with chamfered edges
- Pad wear sensor type: Mechanical
- Country of origin: Mexico
In the box: the pad set with a pad wear sensor, pad shims and abutment clips.
Interchange / FMSI:
FMSI: 7387B-D714 · D714
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Will ZD714 work as brake pads for the 2000-2005 Buick LeSabre?
Yes. Wagner Brake ZD714 is a rear brake pad for the 2000-2005 Buick LeSabre. If your car is another model, look up your own year and model in the "Vehicles it fits" section.
Do the ZD714 pads come with shims and clips?
Yes. This Wagner Brake ZD714 set includes pad shims, abutment clips and a mechanical pad wear sensor.
Is this Wagner Brake disc brake pad set ceramic and copper-free?
Yes. The friction material is ceramic, and the pads use the Wagner OE25 zero-copper friction formulation.
How can I tell these slotted ceramic pads are worn out?
A grinding or scraping noise from the rear brakes when stopping can mean the pads are worn down. A shop can measure the remaining pad thickness.
Are these QuickStop rear pads designed to reduce vibration that causes noise?
Yes. Their application-specific design reduces noise-causing vibration, and a 100% post-cure process gives even friction performance throughout the pad's life.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review