Bosch 50011479 front brake rotor for the 2008-2019 Toyota Highlander and other vehicles is the disc the brake pads clamp to slow the wheel. This Bosch brake rotor comes from the QuietCast line and is vented, without a hub assembly.
- Bosch QuietCast brake rotor with heat flowed castings for consistent wear, quiet operation and long life
- 100% precision balanced for smooth operation and less vibration
- Tight tolerances with industry low run-out and DTV specifications for a smooth pedal feel with no pulsation
- Vane configuration designed for heat dissipation from the braking system
- Full coating, including the vanes where applicable, to protect against corrosion
- ABS sensor rings for trouble-free ABS and traction control operation
Quick facts
- Part: Bosch 50011479 brake rotor
- Also called: disc brake rotor
- Fits: 2008-2019 Toyota Highlander and other vehicles
- Position: Front
- Condition: New
Pedal pulsation, shaking under braking, brake noise or grooves in the rotor face can mean a rotor is worn. These signs alone do not prove the rotor is at fault; a sticking caliper can cause some of them too. This listing is one rotor, and both front sides are normally replaced together, with one rotor on each side of the front axle.
Fits
Vehicles it fits include the 2008-2019 Toyota Highlander, the 2011-2020 Toyota Sienna and the 2015-2021 Lexus NX300h. If your car is not one of those, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2, one on each side of the axle
- Thickness: 28 mm (nominal thickness 28 mm)
- Center bore diameter: 62 mm
- Rotor type: without hub assembly
Build and materials
- Construction: Vented
- Balance: 100% precision balanced
- Coating: full coating, including the vanes where applicable
- ABS sensor ring: for trouble-free ABS and traction control operation
- Edge code: factory engraved, with identification and discard specification
- Condition: New
Interchange: 435120E030 · 4351248110
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is Bosch 50011479 the right Toyota Highlander brake rotor for the 2008-2019 Toyota Highlander?
Yes. Bosch 50011479 is a front rotor for the 2008-2019 Toyota Highlander. The "Vehicles it fits" section shows the other Toyota and Lexus vehicles it fits.
What are the center bore and thickness of this Bosch front rotor?
Bosch 50011479 has a 62 mm center bore and is 28 mm thick. It is a vented rotor sold without a hub assembly.
Are Bosch QuietCast rotors balanced?
Yes. This rotor is 100% precision balanced, with tight tolerances and industry low run-out and DTV specifications for a smooth pedal feel with no pulsation.
Does the Bosch QuietCast premium disc brake rotor have a coating?
Yes. It has a full coating, including the vanes where applicable, to protect against corrosion.
Does this front rotor include an ABS sensor ring?
Yes. This rotor has ABS sensor rings for trouble-free ABS and traction control operation on vehicles equipped with those systems.
