PowerStop EBR1458EVC front brake rotor for the 2017-2020 Mercedes-Benz SLC300 and other vehicles is the disc the brake pads clamp against to slow the wheel. This PowerStop brake rotor, also called a disc brake rotor, bolts on without modifications.
- Evolution Coated line, fully coated with Genuine GEOMET 360 to resist rust and corrosion
- Vented, full-cast body with a smooth surface
- Manufactured to strict tolerances for DTV and runout for smooth, quiet braking
- 100% dynamic mill balanced
Quick facts
- Part: PowerStop EBR1458EVC brake rotor
- Also called: disc brake rotor
- Fits: 2017-2020 Mercedes-Benz SLC300 and other vehicles
- Position: Front
- Condition: New
Pedal pulsation, a shudder through the wheel under braking or deep grooves in the disc can mean the rotor is worn. Before you replace a rotor, rule out worn pads, a sticking caliper and a wheel-bearing problem, since each of those can also make a car vibrate or pull. During a brake service, a measurement at or below the 30.00 mm discard thickness means the rotor is due.
Fits
The 2017-2020 Mercedes-Benz SLC300, the 2015-2016 Mercedes-Benz E400 and the 2016 Mercedes-Benz SLK300 all fit this rotor, and so do more models. It has direct original equipment fit and function, and its weight and vane count match the original equipment design.
Specifications
Fit and size
- Position: front
- Quantity per vehicle: 2
- Outside diameter: 344.00 mm
- Bolt circle: 112.00 mm (4.41 in), 5 lug holes
- Nominal thickness: 32.00 mm (1.26 in)
- Discard thickness: 30.00 mm (1.18 in)
- Overall height: 64.70 mm (2.55 in)
Build and materials
- Type: vented, full cast
- Surface: smooth
- Coating: Genuine GEOMET 360 rust resistant coating
- ABS tone ring: not included
- Condition: new
- Country of origin: China
In the box
One front brake rotor. The front axle on these cars takes two, so order two and fit them together. An ABS tone ring is not included.
Frequently Asked Questions
Will the PowerStop EBR1458EVC fit a 2015-2016 Mercedes-Benz E400?
Yes. PowerStop EBR1458EVC is a front rotor for the 2015-2016 Mercedes-Benz E400. If your car is not named here, look it up in the "Vehicles it fits" section on this page.
What is the discard thickness of the PowerStop EBR1458EVC rotor?
PowerStop EBR1458EVC measures 32.00 mm new and has a 30.00 mm discard thickness. Once a measurement during a brake service reaches 30.00 mm, the rotor is due for replacement.
What is special about PowerStop Evolution Coated rotors?
They are fully coated with Genuine GEOMET 360, a thin layer that protects against rust and corrosion without influencing the vehicle's braking performance.
Are PowerStop front rotors like this one balanced?
Yes. This front rotor is 100% dynamic mill balanced and made to strict tolerances for DTV and runout.
Does this rotor come with an ABS tone ring?
No. An ABS tone ring is not included with this rotor; the listing is a single vented front rotor.
