Dorman - Autograde Engine Oil Drain Plug P/N:090-090
Dorman 090-161 oil drain plug for the 1999-2010 Ford F-150 V8 4.6L or 5.4L, the 2010-2014 F-150 V8 6.2L and other vehicles closes the engine's drain opening so oil stays in until it is drained for service. It replaces a missing or damaged plug and is designed to help give a secure seal.
A worn or damaged drain plug can show up as an oil drip or seep at the drain opening, rounded corners on the hex head or damaged threads. Oil under the vehicle can also come from a leaking oil filter or pan gasket, so these signs alone do not prove the plug is at fault.
It is listed for a wide range of Ford, Lincoln, Mercury and Jeep models, as a direct replacement for the original plug. Other models include the 1998-2010 Ford Mustang V8 4.6L, the 2000 Mustang V8 5.4L and the 2007-2012 Mustang V8 5.4L. The 2014-2020 Jeep Grand Cherokee V6 3.0L is listed too and takes one plug; this package holds five. If your vehicle is not named here, look for it in the "Vehicles it fits" section.
Fit and size
Build and materials
Five oil drain plugs and five O-ring gaskets.
Interchange: 80-07
39680 · 1033 · F75Z6730BA · XW4Z6730AA · JZH100062 · ZZL010404 · ZZM410404
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is 090-161 the right oil drain plug for a 1999-2010 Ford F-150 V8 4.6L or 5.4L?
Yes. Dorman 090-161 is listed for the 1999-2010 Ford F-150 V8 4.6L or 5.4L and the 2010-2014 F-150 V8 6.2L, and each takes one plug. For another vehicle, look it up in the "Vehicles it fits" section.
How many plugs and gaskets come in the 090-161 package?
The Dorman 090-161 package holds five oil drain plugs and five O-ring gaskets.
What grade is the Dorman Autograde oil drain plug?
This is a standard replacement grade steel plug, bolt grade 3, with an M14-1.5 fine metric thread and a pilot point.
Is the Dorman engine oil drain plug magnetic?
No. This steel plug is not magnetic. It is 21.3 mm long with a hex head.
What size tool fits this Dorman drain plug?
A 16 mm tool fits the hex head of the 090-161, and no special tool is required.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.