Dorman - Autograde Wheel Lug Nut P/N:611-150.1
Hold each wheel securely against its hub with this Dorman wheel lug nut, part number 611-150, an M12-1.50 thread nut with a 19mm hex and a 31mm length. It fits many vehicles at both the front and rear wheel positions, among them the 1997-2003 Chevrolet Malibu, 2012-2018 Ford Focus and 2000-2003 Chevrolet Impala. See the Buyer's Guide tab for the full list.
A lug nut threads onto the wheel stud and clamps the wheel against the hub. Stripped or damaged threads, a rounded hex, heavy corrosion or a missing nut are signs a lug nut may need replacing. Tighten it in the sequence and to the torque given in your vehicle's service information.
Interchange: 559-192
559192 · CV6Z1012A · 10194314 · 12337896 · 9599296 · 98114 · 10008N · RB10008N · BD125815 · 220074
This part cross-references / interchanges with the following part numbers:
What size is the Dorman wheel nut 611-150?
It has an M12-1.50 thread, a 19mm hex and a 31mm length. Compare these specs with your original lug nut before ordering.
Does this Dorman Autograde wheel lug nut fit the Ford Focus?
Yes, it is listed for the 2012-2018 Ford Focus at the front and rear wheel positions. Check the Buyer's Guide tab to confirm your exact vehicle.
What does a wheel lug nut do?
It threads onto a wheel stud and clamps the wheel against the hub, holding the wheel in place at the front or rear position.
What are the signs a lug nut may need replacing?
Stripped or damaged threads, a rounded or cracked hex, heavy corrosion or a missing nut are all signs a lug nut may need replacing.
How should I install this lug nut?
Start it by hand on the stud, then tighten it in the sequence and to the torque given in your vehicle's service information.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.