Dorman - Autograde Wheel Lug Stud P/N:610-025.1
Give every lug nut a solid, threaded anchor with this Dorman wheel lug stud, part number 610-153 from the Dorman Autograde line: a 1/2-20 serrated wheel stud with a .625 in. knurl and a 1-11/16 in. length. It fits many vehicles, among them the 1964-1970 Ford Mustang, 1960-1966 Chevrolet Suburban and 1969-1971 Dodge W200 Pickup, and is cataloged for both front and rear wheel positions. See the "Vehicles it fits" section for the full list of direct-fit applications.
These carbon steel wheel lug studs are tested against demanding automotive industry standards for strength, longevity and safety.
The lug stud is the threaded fastener that the lug nut tightens onto to clamp the wheel against the hub. Signs a stud may need replacing include stripped or damaged threads, a bent or broken stud, or a stud that spins in its flange hole. The serrated knurl is the section that grips the mounting flange once the stud is seated. Follow the vehicle service information for the installation procedure and the correct lug nut torque.
Interchange: B142043 · B142043CVS · 2910132 · C3AZ1107A · 2401959 · 3979456 · 97086 · 27783B · RB27783B · BD61138
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a wheel lug stud do?
A wheel lug stud is the threaded fastener that the lug nut tightens onto to hold the wheel against the hub. Dorman 610-153 is a 1/2-20 serrated stud with a .625 in. knurl.
What are the specifications of Dorman 610-153?
It has 1/2-20 threads, a serrated .625 in. knurl and a 1-11/16 in. length. It is made of carbon steel that meets SAE automotive industry standards for strength and hardness.
Will this lug stud fit a 1964-1970 Ford Mustang?
Yes. It is listed for the 1964-1970 Ford Mustang, and also for the 1960-1966 Chevrolet Suburban and the 1969-1971 Dodge W200 Pickup. Check the "Vehicles it fits" section for your exact vehicle.
What are signs a wheel lug stud needs replacing?
Warning signs include stripped or damaged threads, a bent or broken stud, a stud that spins in its flange hole, or a lug nut that will not tighten properly. Inspect the lug nut as well.
How is a serrated wheel stud installed?
A serrated stud is typically pressed into the flange from the back until its head seats, and the knurl grips the hole. Follow the vehicle service information for the procedure and the lug nut torque.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.