Dorman - Autograde Wheel Lug Stud P/N:610-618
Anchor each front wheel to its hub with this Dorman wheel lug stud, part number 610-183 from the Dorman - Autograde line: a 1/2-20 serrated stud made of carbon steel that the lug nut threads onto to clamp the wheel in place. It fits many vehicles, among them the 1960-1970 Chevrolet C30 Pickup, 1968-1970 Chevrolet P30 Van and 1967-1970 GMC C35/C3500 Pickup, as a direct-fit front replacement for the listed applications. See the "Vehicles it fits" section for the full list.
Dorman makes these lug studs from carbon steel and tests them against demanding automotive industry standards for strength, longevity and safety.
Specifications: 1/2-20 thread, .560 in. serrated knurl, 1-11/16 in. length.
A stud with stripped or damaged threads, one that is bent or broken, or one that spins in its bore when the lug nut is tightened may need replacing. The serrated knurl presses into the mounting flange and locks the stud against turning. Follow the vehicle service information for the installation procedure and the lug nut torque.
Interchange: 3680899 · 3849110 · 3883323 · 97114 · 27784B · RB27784B
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a wheel lug stud do?
It is the threaded stud that the lug nut screws onto to clamp the wheel against the hub. This one has a serrated knurl that grips its mounting bore so the stud does not turn.
What are the specifications of Dorman 610-183?
It has a 1/2-20 thread, a .560 in. serrated knurl and a length of 1-11/16 in. It is made of carbon steel that meets SAE standards for strength and hardness.
Does this lug stud fit the 1960-1970 Chevrolet C30 Pickup?
Yes. It is listed as a direct-fit front wheel lug stud for the 1960-1970 Chevrolet C30 Pickup. Check the "Vehicles it fits" section for the other listed vehicles.
What are signs a lug stud may need replacing?
Common signs are stripped or damaged threads, a bent or broken stud, or a stud that spins in its bore when the lug nut is tightened.
How is a serrated lug stud installed?
The serrated knurl is pressed into the stud's mounting flange, where it locks the stud against turning. Follow your vehicle's service information for the procedure and the lug nut torque.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.