Dorman - Autograde Wheel Lug Stud P/N:610-618
Dorman 610-232 rear wheel lug stud for the 1975-1977 Ford F-500 and other vehicles holds the wheel on the hub under its lug nut.
Damaged threads, a bent or cracked stud, or a lug nut that spins without tightening can mean a stud needs replacing. Before you replace a stud, rule out a worn or cross-threaded lug nut, since a nut with damaged threads can feel like a stud problem. One stud goes in each lug hole, and this listing holds ten.
This rear wheel lug stud fits the 1975-1977 Ford F-500 and the 1974 Ford M-450.
Fit and size
Build and materials
Ten wheel lug studs.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Dorman 610-232 rear wheel lug stud fit the 1975-1977 Ford F-500?
Yes. Dorman 610-232 is a rear wheel lug stud listed for the 1975-1977 Ford F-500 and the 1974 Ford M-450.
How many studs come in this Dorman wheel lug stud listing?
The Dorman 610-232 listing contains ten wheel lug studs. Each lug hole takes one stud.
Is the thread on this rear wheel lug stud left-hand or right-hand?
It is a counterclockwise (left-hand) thread, 3/4-16 SAE, with 16 threads per inch.
How long is the Dorman 610-232 wheel lug stud?
Under head length is 2.625 in (2-5/8 in). The threaded portion is 1.25 in, the shoulder is 1.375 in and the knurl diameter is 0.815 in.
What does a damaged wheel lug stud look like?
Stripped threads, a cracked or bent stud, or a lug nut that will not tighten down can be signs. A shop can inspect the studs during a wheel or brake service.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.